| This is gist. | |
| There are many like it, but this one is mine. | |
| It is my life. | |
| I must master it as I must master my life. | |
| Without me gist is useless. | |
| Without gist, I am useless. |
| Latency Comparison Numbers (~2012) | |
| ---------------------------------- | |
| L1 cache reference 0.5 ns | |
| Branch mispredict 5 ns | |
| L2 cache reference 7 ns 14x L1 cache | |
| Mutex lock/unlock 25 ns | |
| Main memory reference 100 ns 20x L2 cache, 200x L1 cache | |
| Compress 1K bytes with Zippy 3,000 ns 3 us | |
| Send 1K bytes over 1 Gbps network 10,000 ns 10 us | |
| Read 4K randomly from SSD* 150,000 ns 150 us ~1GB/sec SSD |
Thanks to @seejee for making this for me!!!
The goal of this is to have an easily-scannable reference for the most common syntax idioms in C# and Rust so that programmers most comfortable with C# can quickly get through the syntax differences and feel like they could read and write basic Rust programs.
What do you think? Does this meet its goal? If not, why not?
| original word - filter | |
| cookiezi - used to be "obama", "justin bieber" and "kettle". filter is removed now. | |
| cookiez - used to be "lady gaga", now removed | |
| dress - used to be "rainbow", now removed | |
| cheat - break the law | |
| ppv2 - pp | |
| gay - coconut milk | |
| fgt - lieutenant | |
| nigger - fine sir | |
| loli - fine lady |
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
Create a template service file at /etc/systemd/system/[email protected]. The template parameter will correspond to the name
of target host:
[Unit]
Description=Setup a secure tunnel to %I
After=network.target
| #!/usr/bin/python | |
| # | |
| # Pickle deserialization RCE payload. | |
| # To be invoked with command to execute at it's first parameter. | |
| # Otherwise, the default one will be used. | |
| # | |
| import cPickle | |
| import sys | |
| import base64 |
These are misspellings of Plailect's name. All of these were done by other users.
type StringBool = "true"|"false";
interface AnyNumber { prev?: any, isZero: StringBool };
interface PositiveNumber { prev: any, isZero: "false" };
type IsZero<TNumber extends AnyNumber> = TNumber["isZero"];
type Next<TNumber extends AnyNumber> = { prev: TNumber, isZero: "false" };
type Prev<TNumber extends PositiveNumber> = TNumber["prev"];
| # blog post | |
| # | |
| # https://www.jessesquires.com/blog/customizing-git-log/ | |
| git log --graph --pretty=format:'commit: %C(bold red)%h%Creset %C(red)<%H>%Creset %C(bold magenta)%d %Creset%ndate: %C(bold yellow)%cd %Creset%C(yellow)%cr%Creset%nauthor: %C(bold blue)%an%Creset %C(blue)<%ae>%Creset%n%C(cyan)%s%n%Creset' |