hpwit

#include <WiFi.h>
//#include <ESP8266WiFi.h>

#include <WiFiClient.h>
#include <Artnet.h>

#define BLYNK_PRINT Serial

hpwit

//
//  dddddd.c
//
//
//  Created by Yves BAZIN on 5/09/18.
//


//-------------------Set RTC-------------------------------------------------------
#include "time.h"

hpwit

   // This code is meant to take at most 10 inputs  (eventually 70) and display them in WS2812B individually addressed LEDs
   // 9/3/2018 : Now keeps track of what LEDs are on and how long each have been on (almost)
   // Changes needed: Find why the leds never turn off. currently the time on is not changing past 30miliseconds.
   // 
   

    #include <FastLED.h>
    #define LED_PIN     7
    #define NUM_LEDS    10
    #define BRIGHTNESS 30       // 0-64

hpwit

//**********************************************************************************************************//
// With this project its possible to drive Ws2812 Leds with Artnet over Wifi (with Jinx! or Glediator)      //
// and it´s also possible to switch to the SD-card version where animations can be recorded from Artnet and // 
// than be played back. Although a Matrix-clock can be switched on and off over the animations.             //
// You will need the Fastled Library from Samguyer https://github.com/samguyer/FastLED                      //
// and the Artnet-library of Yves Bazin: https://github.com/hpwit/artnet                                    //
//                                                                                                          //
// Created by Stefan Weickinger & Yves BAZIN 2018                                                           //
//**********************************************************************************************************//

hpwit

//You would have a class define like this

class Strip
{
	public:
	CRGB *leds;
	Strip(int num_leds);
	void Comet(CRGB color);
	void OTC(CRGB color);
	void Ravel(CRGB color);

hpwit

#define NUM_STRIPS 20
#define FastMask(MASK) ((MASK & 15) << 2 ) | ((MASK & 4080) << 8 ) | ((MASK & 28672) << 9 ) | ((MASK & 1015808) << 10 )

#define FASTLED_ALLOW_INTERRUPTS 0
#define INTERRUPT_THRESHOLD 1
#include "FastLED.h"
FASTLED_USING_NAMESPACE
#define FASTLED_SHOW_CORE 0
#define PORT_MASK 0b111110111011111111000000111100

hpwit

#define NUM_STRIPS 8
#define FastMask(MASK) ((MASK & 1) << 2 ) | ((MASK & 6) << 3 ) | ((MASK & 8) << 12 ) | ((MASK & 48) << 14 ) | ((MASK & 64) << 15 ) | ((MASK & 128) << 16 )

#define FASTLED_ALLOW_INTERRUPTS 0
#define INTERRUPT_THRESHOLD 1
#include "FastLED.h"
FASTLED_USING_NAMESPACE
#define FASTLED_SHOW_CORE 0
#define PORT_MASK 0b0101011001000000000110100

hpwit

// code by Mark Estes
// this version has audio input turned off unless you are specific matrix size

#include <SPI.h>

//#include <FastLED.h>        //https://github.com/FastLED/FastLED

// Yves adds
#define NUM_STRIPS 16 
//define NUM_STRIPS 20 //if you have 20 strips

hpwit

void PixelOn(int x,int y,CRGB Color)
{
    
    if (x<0 or y<0 or x>=LED_WIDTH or y>=LED_HEIGHT)
        return ;
    if(y%2==0)
        leds[x+y*LED_WIDTH]=Color;
    else
    {        

hpwit

#include <WiFi.h>
//#include <ESP8266WiFi.h>

#include <WiFiClient.h>
#include <Artnet.h>
#define FASTLED_ALLOW_INTERRUPTS 0
#define INTERRUPT_THRESHOLD 1
#include "FastLED.h"
FASTLED_USING_NAMESPACE