jononon

x = [50,50,100,150,200,250,300,350,400,450,500,550,600,650,700,750,800,850,900,950,1000,1050,1100,1150,1200,1250,1300,1350,1400,1450,1500,1550,1600,1650,1700,1750,1800,1850,1900,1950]
y = [635,633,630,627,621,612,603,597,594,594,599,614,635,644,666,694,733,747,748,748,749,749,750,750,749,749,746,738,730,722,714,706,697,690,686,682,681,681,681,681]
n = 6

p = polyfit (x, y, n)
f = polyout(p, 'x')
fplot(f, [min(x),max(x)])

jononon

activate application "Google Chrome"
set firstname to "firstname"
set lastname to "lastname"
set tel1 to "310"
set tel2 to "---"
set tel3 to "----"
set dlid to "driverslicencenumber"
set pageURL to "a?"
set locationList to {"ARLETA", "BELL GARDENS", "BELLFLOWER", "COMPTON", "CULVER CITY", "EL MONTE", "FULLERTON", "GLENDALE", "HAWTHORNE", "HOLLYWOOD", "INGLEWOOD", "LONG BEACH", "LOS ANGELES", "MONTEBELLO", "NEWHALL", "OXNARD", "PASADENA", "SAN PEDRO", "SANTA MONICA", "SANTA PAULA", "SIMI VALLEY", "THOUSAND OAKS", "TORRANCE", "VAN NUYS", "WEST COVINA", "WESTMINSTER", "WHITTIER", "WINNETKA"}
(*5 2 2 6*)

jononon

Prompt A
ClrList L₆

For(I,1,√(A))
If ((A/I)=round(A/I,0))
I→L₆(dim(L₆)+1)
End

For(I,dim(L₆),1,-1)
If (L₆(dim(L₆))≠(A/L₆(I)))

jononon

#pragma config(I2C_Usage, I2C1, i2cSensors)
#pragma config(Sensor, in7,    gyro,           sensorGyro)
#pragma config(Sensor, in8,    powerExpander,  sensorAnalog)
#pragma config(Sensor, dgtl1,  claw,           sensorDigitalOut)
#pragma config(Sensor, dgtl2,  cubeAuton,      sensorTouch)
#pragma config(Sensor, dgtl8,  leftDriveEnc,   sensorQuadEncoder)
#pragma config(Sensor, dgtl10, rightDriveEnc,  sensorQuadEncoder)
#pragma config(Sensor, dgtl12, liftStop,       sensorTouch)
#pragma config(Sensor, I2C_1,  liftEnc,        sensorQuadEncoderOnI2CPort,    , AutoAssign )
#pragma config(Motor,  port1,           rightWheel1,   tmotorVex393_HBridge, openLoop, reversed)

jononon

#pragma config(I2C_Usage, I2C1, i2cSensors)
#pragma config(Sensor, in1,    clawPot2,       sensorPotentiometer)
#pragma config(Sensor, in2,    clawPot1,       sensorPotentiometer)
#pragma config(Sensor, dgtl1,  liftBottom,     sensorTouch)
#pragma config(Sensor, dgtl2,  autonRL,        sensorTouch)
#pragma config(Sensor, I2C_1,  driveR,         sensorQuadEncoderOnI2CPort,    , AutoAssign )
#pragma config(Sensor, I2C_2,  driveL,         sensorQuadEncoderOnI2CPort,    , AutoAssign )
#pragma config(Sensor, I2C_3,  liftEncoder,    sensorQuadEncoderOnI2CPort,    , AutoAssign )
#pragma config(Motor,  port1,           liftL3,        tmotorVex393HighSpeed_HBridge, openLoop)
#pragma config(Motor,  port2,           leftDrive,     tmotorVex393HighSpeed_MC29, openLoop, encoderPort, I2C_1)

jononon

#pragma config(Sensor, dgtl1,  liftBottom,     sensorTouch)
#pragma config(Motor,  port1,           liftRI,        tmotorVex393_HBridge, openLoop)
#pragma config(Motor,  port2,           liftRO,        tmotorVex393_MC29, openLoop)
#pragma config(Motor,  port3,           liftLI,        tmotorVex393_MC29, openLoop)
#pragma config(Motor,  port4,           liftLO,        tmotorVex393_MC29, openLoop, reversed)
#pragma config(Motor,  port5,           intake1,       tmotorVex393_MC29, openLoop, reversed)
#pragma config(Motor,  port6,           intake2,       tmotorVex393_MC29, openLoop)
#pragma config(Motor,  port7,           leftDrive1,    tmotorVex393HighSpeed_MC29, openLoop, driveRight)
#pragma config(Motor,  port8,           leftDrive2,    tmotorVex393HighSpeed_MC29, openLoop)
#pragma config(Motor,  port9,           rightDrive1,   tmotorVex393HighSpeed_MC29, openLoop, reversed)

jononon

#pragma config(Sensor, dgtl1,  liftBottom,     sensorTouch)
#pragma config(Motor,  port1,           liftL3,        tmotorVex393_HBridge, openLoop, reversed)
#pragma config(Motor,  port2,           liftR1,        tmotorVex393_MC29, openLoop)
#pragma config(Motor,  port3,           liftR2,        tmotorVex393_MC29, openLoop)
#pragma config(Motor,  port4,           leftDrive,     tmotorVex393HighSpeed_MC29, openLoop, driveLeft)
#pragma config(Motor,  port5,           liftL1,        tmotorVex393_MC29, openLoop, reversed)
#pragma config(Motor,  port6,           liftL2,        tmotorVex393_MC29, openLoop)
#pragma config(Motor,  port7,           rightDrive,    tmotorVex393HighSpeed_MC29, openLoop, reversed, driveRight)
#pragma config(Motor,  port8,            ,             tmotorVex393HighSpeed_MC29, openLoop, reversed)
#pragma config(Motor,  port9,           intake,        tmotorVex393_MC29, openLoop)

jononon

void setLeftWheelSpeed(int speed) {
  motor[leftWheel1] = speed;
  motor[leftWheel2] = speed;
  motor[leftWheel3] = speed;
  motor[leftWheel4] = speed;
}

void setRightWheelSpeed(int speed) {
  motor[rightWheel1] = speed;

jononon

#!/bin/bash
for i in `seq 1 24`;
do
  ./cartLabel.py --print --label $i
done 

jononon

activate application "Google Chrome"
set tabcount to 11
set firstpagetabcount to 12
set secondpagetabcount to 13
set returntocoursepagecount to 9
set moduleURL to "http://www.vdriveusa.com/moodle/mod/flash/view.php?id=111"
set AppleScript's text item delimiters to "?"
set firstTime to true
set pageURL to "a?"
set delayTime to 30