Kyle Mohr kylefmohr

In Powershell, before you've installed Kali:

wsl --set-default-version 2
wsl --install -d kali-linux

Now create your Kali username and password. Then...

sudo su

AT&T U-Verse S30-S1B Decoded IR Codes

This remote was a challenge, so I figured I'd share my findings because I didn't see this anywhere else online.

It uses the obscure "RCMM" protocol, sometimes referred to as "Nokia". RCMM can be sent in sizes of 12, 24, or 32 bits, this remote exclusively uses 32 bit codes. Another quirk of the protocol is that each button has two codes, one with a bit called "toggle" activated and one without. I've included both codes for each button.

You'll notice that VOL+, VOL-, and Mute aren't included, this is because these codes are sent directly to your TV, and will vary based on your setup. Also, the remote will send an additional "Power on/off" signal to your TV when you press the power button, but this signal is not included in the chart.

Button No.	Button Name	Command (no toggle bit)	Command (toggle bit)
1	Power	0x2340260C	0x2

Latest Update 2021-03-06 : New image showing the new "Services" in Home Assistant and got some tips from the comments below.

Credits and thanks: Home Assistant Forum users & Github users: @ocso, @wiphye, @teachingbirds, @tboyce1, @simbesh, @JeffLIrion @ff12 @rebmemer @siaox @DiederikvandenB @Thebuz @clapbr @Finsterclown

Start apps on your android device (in the examples below, my Nvidia Shield TV) from Home Assistant

Starts Youtube App

entity_id: media_player.shield
command: >-

	#!/bin/bash
	#pre-requisite: hostname must resolve to the public IP of the server!
	#if you receive errors regarding being unable to configure proxmox packages, this is why!
	#you can change the hostname with "hostnamectl set-hostname <new hostname>" and reboot

	sudo apt update && sudo apt upgrade -y
	myip=$(curl --silent ifconfig.me)
	echo $myip
	hosts=hosts
	echo "localhost 127.0.0.1" > hosts

	#!/bin/bash
	#Tested working on Ubuntu 20.04 and 22.04!
	VERSION='4.22.1'
	echo "This script will install code-server v$VERSION, enable it as a service, and expose it to the internet with a LetEncrypt Certificate."
	echo ""
	echo "By this point, you should already have a domain name pointed to the IP address of this server!"
	read -p "Press ENTER to continue or CTRL+C to quit"

	echo "Which domain name do you want to use? Including subdomain if applicable: "
	read domainname

	#!/bin/bash
	#This script assumes that you have a domain name with a DNS record pointed to Proxmox's public IP


	echo "Enter the domain name that will resolve to this servers IP address"
	read hostname
	sudo apt update && sudo apt full-upgrade -y
	hostnamectl set-hostname $hostname
	myip=$(curl --silent ifconfig.me)
	echo "127.0.0.1 localhost" > hosts

	#!/bin/bash
	#############################################################################################################
	#Changelog #
	#############################################################################################################
	#Added prompts for user input to configure script instead of relying on hardcoded settings.
	#Added a lot of errorchecking
	#The script is now optionally compatible with dash (this is the reason for there being a sed command at the end of every echo -e instance, dash liked to print the -e part when I was testing.)
	#Vastly improved compatibility across distributions
	#Special thanks to everyone who contributed here: https://gist.github.com/i3v/99f8ef6c757a5b8e9046b8a47f3a9d5b
	#Also extra special thanks to BAGELreflex on github for this: https://gist.github.com/BAGELreflex/c04e7a25d64e989cbd9376a9134b8f6d it made a huge difference to this improved version.

	#!/bin/bash
	#Converts an Ubuntu Focal installation to a Debian Bullseye installation
	#This script is intended to be run on a fresh Ubuntu Focal installation

	rm -rf /etc/apt/sources.list.*
	# Append the Debian Bullseye sources to the sources.list file, keeping the Ubuntu sources for now
	cat << EOF >> /etc/apt/sources.list
	deb http://deb.debian.org/debian bullseye main contrib non-free
	deb http://deb.debian.org/debian-security/ bullseye-security main contrib non-free
	deb http://deb.debian.org/debian bullseye-updates main contrib non-free"

	Set-ExecutionPolicy Bypass -Scope Process -Force; [System.Net.ServicePointManager]::SecurityProtocol = [System.Net.ServicePointManager]::SecurityProtocol -bor 3072; iex ((New-Object System.Net.WebClient).DownloadString('https://community.chocolatey.org/install.ps1'))

	version: '3'

	services:
	traefik:
	image: 'traefik'
	command:
	- '--api=true'
	- '--api.insecure=true'
	- '--api.dashboard=true'
	- '--providers.docker=true'