davecoutts

# This gist gives instructions to build a basic deb package of netatalk-3.1.11 using checkinstall on Ubuntu 18.04.
# With the idea being that you build the deb on your build server and install from the resulting deb in production.
# Given that the deb is packaged using checkinstall with basic options, think home use, not real production.

# Note that this build does not provide the spotlight feature.
# The tracker packages have been left out as the intent was to provide TimeMachine functionality only.


#------------------------------------------------------------
# STEP ONE - Make the Netatalk deb on a build machine

laris

Introduction

The purpose of this short howto is to show you how to:

• use openconnect [1] to connect to an enterprise cisco anyconnect endpoint
• whilst minimizing the amount of traffic that your route through the vpn connection

Usually VPN administrators will puth the default route to the users, so that all user traffic is routed through the vpn connection. This is to address the various security concerns around compromised user computers bridging external internet traffic into the secure VPN network.

While the VPN administrator can push routes to the clients, the client can ignore these default routes and establish client side routing so that only the required A.B.C.D/E network is routed through the VPN. All other traffic will still use the clients default route and default outbound internet connection.

stefancocora

Introduction

The purpose of this short howto is to show you how to:

• use openconnect [1] to connect to an enterprise cisco anyconnect endpoint
• whilst minimizing the amount of traffic that your route through the vpn connection

Usually VPN administrators will puth the default route to the users, so that all user traffic is routed through the vpn connection. This is to address the various security concerns around compromised user computers bridging external internet traffic into the secure VPN network.

While the VPN administrator can push routes to the clients, the client can ignore these default routes and establish client side routing so that only the required A.B.C.D/E network is routed through the VPN. All other traffic will still use the clients default route and default outbound internet connection.

Neonox31

DRAFT

Prerequisites

• Install Proxmox 5.0.X with lvm storage
• Get the jun's loader 1.02b at the following url :
• Retrieve a DSM pat file here : https://usdl.synology.com/download/DSM/release/

Procedure

• Create the proxmox VM as the following :
• OS Type : Linux 4.x

gurre

How to program the ATTiny85 on MacOS Sierra

Check MacOS version

$ sw_vers 
ProductName:	Mac OS X
ProductVersion:	10.11.6
BuildVersion:	15G1611

8enmann

# Download installers
mkdir ~/Downloads/nvidia
cd ~/Downloads/nvidia
wget https://developer.nvidia.com/compute/cuda/8.0/Prod2/local_installers/cuda_8.0.61_375.26_linux-run
wget http://us.download.nvidia.com/XFree86/Linux-x86_64/384.59/NVIDIA-Linux-x86_64-384.59.run
sudo chmod +x NVIDIA-Linux-x86_64-384.59.run
sudo chmod +x cuda_8.0.61_375.26_linux-run
./cuda_8.0.61_375.26_linux-run -extract=~/Downloads/nvidia/
# Uninstall old stuff
sudo apt-get --purge remove nvidia-*

yashpatel5400

"""
__name__   = predict.py
__author__ = Yash Patel
__description__ = Full prediction code of OpenAI Cartpole environment using Keras
"""

import gym
import numpy as np
from keras.models import Sequential
from keras.layers import Dense, Dropout

Ircama

Configuring the Digispark ATTINY85 board for Arduino IDE and upgrading the bootloader

Warning: this document has to be updated by pointing to https://github.com/SpenceKonde/ATTinyCore

This note describes the configuration of an ATtiny85 based microcontroller development board named Digispark and similar to the Arduino line. It is available in many online marketplaces for roughly 1 dollar (e.g., Ebay, Amazon, AliExpress) and is shipped fully assembled, including a V-USB interface (a software-only implementation of a low-speed USB device for Atmel's AVR microcontrollers). Coding is similar to Arduino: it uses the familiar Arduino IDE and is already provided with a ready-to-use bootloader (

nobodypb

#!/bin/bash
SOURCE=/volume1
DEST=/volume2

APPDIR=\@appstore

ASK=true

while getopts ":y" opt; do
  case $opt in

vibin

tell application "Google Chrome"
	set visibleUrl to get URL of active tab of window 1
end tell
tell application "Safari"
	open location visibleUrl
	activate
end tell