likeablob / 01-yet-another-minicap-python3-client.md

Last active April 4, 2025 11:23

A simple minicap client with python3

minicap-python3-client

The following are heavily based on the code from openstf/minicap#96.

`minicap` installation

Plan A: Use `minicap-prebuilt`

$ npm init -y
$ npm i -S minicap-prebuilt
$ ls node_modules/minicap-prebuilt/prebuilt/

likeablob / hacking-f18-smartwatch.md

Last active January 22, 2020 16:01

Hacking "No.1"'s F18 Smartwatch

ISP

There is an ISP port under the LCD module.
From left to right, VCC SWCLK SWDIO GND.

Flashing via BMP

# Unlock
arm-none-eabi-gdb --quiet -ex "target extended-remote /dev/ttyACM0" -ex "monitor connect_srst enable" -ex "set non-stop on" -ex "monitor swdp_scan" -ex "att 2" -ex "mon erase_mass"

likeablob / kicad-fusionpcb-pcba-notes-ja.md

Last active March 2, 2026 01:59

KiCadでFusionPCBのPCBA(部品実装)を利用するメモ

確認環境

Ubuntu 18.04 (bionic)
KiCad 5.0.1

注文に必要なもの

実装図
ピック&プレースファイル
BOM(部品表)

likeablob / README.md

Last active October 26, 2019 05:50

Implement Capacitive Touch Sensor (C-T Method) with Digispark

Capactive Touch Sensor with Digispark

$ pio init -b digispark-tiny

likeablob / opizp2_armbian_setup.md

Last active October 12, 2019 09:48

Orange Pi Zero +2 (H3/H5) Armbian セットアップメモ

ディスクイメージのダウンロード
- H3 https://www.armbian.com/orange-pi-zero-plus-2-h3/
- H5 https://www.armbian.com/orange-pi-zero-2-h5/
展開してmicroSDに書き込み

$ 7z x Armbian_5.90_Orangepizeroplus2-h3_Ubuntu_bionic_next_4.19.57.7z
$ sudo dd if=./Armbian_5.90_Orangepizeroplus2-h3_Ubuntu_bionic_next_4.19.57.img of=/dev/mmcblk0 bs=1M

microUSBで接続するとg_serialなシリアルデバイス/dev/ttyACM*として認識される

likeablob / running-debian-on-goke-gk710x-devices-chroot.md

Last active March 12, 2022 22:13

Running Debian on Goke GK710x devices (chroot)

WIP

Prerequisites

A Goke GK710x-based device(uname -r === 3.4.43-gk)
Ubuntu 18.04 as a build environment

Set up the toolchain

Install crosstool-ng

$ wget http://crosstool-ng.org/download/crosstool-ng/crosstool-ng-1.24.0.tar.xz
$ tar xvf http://crosstool-ng.org/download/crosstool-ng/crosstool-ng-1.24.0.tar.xz

likeablob