Skip to content

Instantly share code, notes, and snippets.

View lkmhaqer's full-sized avatar

Charles van Niman lkmhaqer

View GitHub Profile
anunnaki-P3#show boot
BOOT variable = disk0:s222-adventerprisek9_wan-mz.122-18.SXF17b.bin,12
CONFIG_FILE variable does not exist
BOOTLDR variable =
Configuration register is 0x2102
Standby is not up.
anunnaki-P3(config)#do sh run | i boot
boot system disk0:s222-adventerprisek9_wan-mz.122-18.SXF17b.bin
anunnaki-P3(config)#do dir bootflash:
Directory of bootflash:/
2 -rw- 1688336 Jan 01 2000 00:01:34 +00:00 c6msfc2-boot-mz.121-8b.E11
31981568 bytes total (15904460 bytes free)
anunnaki-P3(config)#bot
anunnaki-P3(config)#boo
anunnaki-P3(config)#boot bot
anunnaki-P3(config)#boot boo
anunnaki-P3#remote command module 1 show boot
BOOT variable = disk0:s222-adventerprisek9_wan-mz.122-18.SXF17b.bin,12
CONFIG_FILE variable =
BOOTLDR variable = bootflash:c6msfc2-boot-mz.121-8b.E11
Configuration register is 0x2100
#sh ve | i IOS
IOS (tm) s222_rp Software (s222_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF17b, RELEASE SOFTWARE (fc1)
giza-P1#sh run | i mls
mls flow ip full
mls flow ipx destination
mls nde sender version 5
no mls acl tcam share-global
mls netflow sampling
giza-P1#sh run | i flow
ip flow ingress layer2-switched vlan 10
mls flow ip full
mls flow ipx destination
@lkmhaqer
lkmhaqer / gist:8828461
Last active August 29, 2015 13:56
IPAM-RSVPCLOUD
IPAM RSVPCLOUDZ
MAIN ASN LOOP SPACE
212.78.167.0/24
MAIN ASN INT SPACE
68.99.204.0/24
(config-if)#ip add 68.99
*Feb 6 11:48:29.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback10, changed state to up.204.7 255.255.255.255
% 68.99.204.7 overlaps with Serial1/1
R1#sh mpls traf tun
Name: R1_t0 (Tunnel0) Destination: 212.78.167.6
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 30)
Config Parameters:
Bandwidth: 50 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
#sh controllers te0/4/0/31 all
Operational data for interface TenGigE0/4/0/31:
State:
Administrative state: enabled
Operational state: Up
LED state: Green On
Phy:
Media type: R fiber over 1310nm optics
router bgp 65000
no synchronization
bgp log-neighbor-changes
redistribute connected
redistribute static
neighbor 1.1.1.1 remote-as 65000
neighbor 1.1.1.1 update-source Loopback0
neighbor 1.1.1.1 soft-reconfiguration inbound
neighbor 10.10.20.20 remote-as 456
neighbor 10.10.20.20 local-as 123 no-prepend replace-as