3.5 fps, Paperwhite 3
@adtac_
mobileread.com is your best resource here, follow the instructions from the LanguageBreak thread
I didn't really follow the LanguageBreak instructions because I didn't care about most of the features + I was curious to do it myself, but the LanguageBreak github repo was invaluable for debugging
webRequestBlocking API, which is neccesary for (effective) adblockers to workExtensionManifestV2Availability key was added and will presumably stay forever after enterprises complain enoughYou can use this as a regular user, which will let you keep your mv2 extensions even after they're supposed to stop working
In a terminal, run:
aka what i did to get from nothing to done.
note: these are designed to be primarily a re-install guide for myself (writing things down helps me memorize the knowledge), as such don't take any of this on blind faith - some areas are well tested and the docs are very robust, some items, less so). YMMV
You can inherit the environment variables from PID 1 by iterating over the list of null-terminated strings
in /proc/1/environ, parsing the first characters up to the first = as the variable name, setting the
remaining value as that variable, and exporting it.
The Code Snippet
This works with multiline environment variables, and environment variables with arbitrary values, like
strings, including = or JSON blobs.
Paste this in your current terminal session to inherit the environment variables from PID 1:
I wanted my iPad Pro to be able to use the Magic Keyboard in portrait mode, but the current Smart Connector configuration does not allow this. With too much time on my hands, I made a short jumper cable using a section of USB cable, 5-pin POGO connectors (the 5-pin works using pins 1, 3, and 5, and removing pins 2 and 4), a small electrical project box, 3mm N52 magnets, and some epoxy and Sugru to pack everything into place. My cable and connections orientation had more to do with the boxes I found to encase the connector (with holes on the small end) than anything else. Obviously, there will be many ways to do this.
2019-05-18
It's uncanny how closely this talk follows a line of reasoning I've been working on lately. If you're copied here, we may have discussed one or more of its aspects
https://www.youtube.com/watch?v=pW-SOdj4Kkk
(Jonathan Blow is an independent video game developer, speaking here at a conference in Moscow.)
| #!/bin/bash | |
| # | |
| # credit to machupicchubeta/dotfiles/bin/enable_to_sudo_authenticate_with_touch_id.sh | |
| set -eu | |
| set -o pipefail | |
| sudo chmod +w /etc/pam.d/sudo | |
| if ! grep -Eq '^auth\s.*\spam_tid\.so$' /etc/pam.d/sudo; then | |
| ( set -e; set -o pipefail | |
| # Add "pam_tid.so" to a first authentication |
There was a reddit post about installing Arch on NTFS3 partition. Since Windows and Linux doesn't have directories with same names under the /(C:\), I thought it's possible, and turned out it was actually possible.
If you are not familiar to Linux, for example you've searched on Google "how to dualboot Linux and Windos" or brbrbr... you mustn't try this. This is not practical.
ACloudGuru.com has a good course and practice test available to help you score >90% found here.
ACloudGuru's course does not go in-depth enough for either of these exams I have found. I found the best, super in-depth training from a former Linux Academy instructor, Adrian Cantrill. ACloudGuru purchased Linux Academy in 2020, and unfortunately, most of their content was retired :( Adrian has started his own set of reasonably priced courses under his name, and they are here.