Luckydonald luckydonald

Setup and use GPIOs on a Cubietruck

Cubietruck is also known as Cubieboard 3

Note: This file documents just what I did, first of all as a note for myself. So this is not primarily intended as a tutorial. Because it still might be helpfull, I uploaded it. The GPIO function is now confirmed to work, tested with my multimeter, but I am still waiting for my jumper cables to arrive, so I can use them securely.

Licensed under a Luna-Will-Cry-If-You-Modify-Or-Redistribute-This 1.0 licence.

Install Shairport-Sync on a Cubieboard

I did the steps in this Cubietruck GPIO tutorial before, so I might miss dependencies already installed there. If that is the case, bug me in a comment.

Licensed under a Luna-Will-Cry-If-You-Modify-Or-Redistribute-This 1.0 licence.

Install dependencies

source

sudo apt-get install -y autoconf libtool libdaemon-dev libasound2-dev libpopt-dev avahi-daemon libavahi-client-dev libssl-dev git
sudo apt-get install -y libsoxr-dev

In this file I document the steps taken to get the onboard wifi chip of the Cubietruck (Cubieboard 3) up and running.

Add the wifi driver to the modules to load on startup.

sudo nano /etc/modules

Now add at the end of the file, if not already in the list:

bcmdhd

This documents how I did setup my Stereo to automatically turn on when I play music over airplay, and turns off afterwards.

FEX:

gpio_pin_5 = port:PB15<0><0><default><0>

luckydonald/JavaPipBoyServer/PROTOCOL.md Now summarizes this and other findings, and is generally more maintainend.

C Structs

struct Entry {
  uint8_t type;
  uint32_t id;
  switch (type) {
    case 0:
      uint8_t boolean;

Prerequirements

sudo apt-get update
sudo apt-get upgrade
sudo apt-get install apt-rdepends

Get the stuff needed for compiling

sudo apt-get install `apt-rdepends python3 | grep ^lib`

Ponyville FM

Now playing

http://ponyvillefm.com/data/nowplaying json ^_2016-05-20

	using SteamKit2;
	using System.Collections.Generic;
	using SteamTrade;
	using System;
	using System.Timers;

	namespace SteamBot
	{
	public class KeyUserHandler : UserHandler
	{

	using SteamKit2;
	using SteamTrade;
	using System;
	using System.Collections.Generic;
	using System.Threading;
	using System.Timers;

	namespace SteamBot
	{
	public class ScrapUserHandler : UserHandler

	Hier die Schritte zum Installieren/Compilieren:

	0- Download

	http://www.cygwin.com/
	Download > Richtige Version (meist 64 Bit)
	https://cygwin.com/setup-x86.exe
	Dann kann schon mal mit SChritt (1) gestartet werden.

	http://web.stanford.edu/group/radar/softwareandlinks/sw/snaphu/