Skip to content

Instantly share code, notes, and snippets.

View mark-stopka's full-sized avatar

Mark Stopka mark-stopka

43 followers · 81 following
View GitHub Profile
@mark-stopka
mark-stopka / e3372_openwrt_setup.md
Created October 17, 2020 15:32 — forked from aliicex/e3372_openwrt_setup.md
Using the Huawei E3372 4G Dongle with OpenWRT

Hardware requirements:

USB modem - Huawei E3372h-153/E3372s-153 (in StickMode; non-HiLink)

Firmware versions beginning with 21.xxx.xx.xx.xx NOT 22.xxx.xx.xx.xx

Router running OpenWRT; I use:

  • GL.iNet AR750S firmware v3.022
  • OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.196.56128-9112198)
@mark-stopka
mark-stopka / e3372_openwrt_setup.md
Created October 17, 2020 15:32 — forked from aliicex/e3372_openwrt_setup.md
Using the Huawei E3372 4G Dongle with OpenWRT

Hardware requirements:

USB modem - Huawei E3372h-153/E3372s-153 (in StickMode; non-HiLink)

Firmware versions beginning with 21.xxx.xx.xx.xx NOT 22.xxx.xx.xx.xx

Router running OpenWRT; I use:

  • GL.iNet AR750S firmware v3.022
  • OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.196.56128-9112198)
@mark-stopka
mark-stopka / Huawei_E3372_openwrt.md
Created October 17, 2020 16:21 — forked from bjoern-r/Huawei_E3372_openwrt.md
How to use a Huawei E3372 on OpenWRT

HOWTO use a Huawei E3372 on OpenWRT

This modem is also sold as a MegaFon M150-2 USB dongle

Needed Software

Install the needed packages via opkg tool

opkg update
@mark-stopka
mark-stopka / 12d1:1f01
Created October 17, 2020 17:13 — forked from elupus/12d1:1f01
Setup of e3372 modem on pfsense
# /usr/local/share/usb_modeswitch/12d1:1f01
# Huawei E353 (3.se) and others
TargetVendor=0x12d1
TargetProductList="14db,14dc"
HuaweiNewMode=1