giuliano-macedo

$
M_{ij}=\sum\limits_{x}\sum\limits_{y}x^iy^iI(x,y)\\
\eta_{pq}=\sum\limits_{x}\sum\limits_{y}(x-\bar x)^p(y- \bar y)^qI(x,y)\\
\bar x=\frac{M_{10}}{M_{00}}, \bar y=\frac{M_{01}}{M_{00}}\\
\mu_{pq}=\frac{\eta_{pq}}{\eta_{00}^\gamma},\gamma=\frac{p+q}{2}\\
H_{1}   = \mu_{20} + \mu_{02}\\
H_{2}   = (\mu_{20} - \mu_{02})^2 + 4(\mu_{11})^2\\
H_{3} = (\mu_{30} - 3\mu_{12})^2 + (\mu_{03} - 3\mu_{21})^2\\
H_{4}  = (\mu_{30} + \mu_{12})^2 + (\mu_{03} + \mu_{21})^2\\
H_{5}  = (\mu_{30} - 3\mu_{12})(\mu_{30} + \mu_{12})((\mu_{30} + \mu_{12})^2 - 3(\mu_{21} + \mu_{03})^2) + (3\mu_{21} - \mu_{03})(\mu_{21} + \mu_{03})(3(\mu_{30} + \mu_{12})^2 - (\mu_{03} + \mu_{21})^2)\\

Marzogh

import serial
import csv
import re
import matplotlib.pyplot as plt
import pandas as pd
 
portPath = "/dev/ttyACM0"       # Must match value shown on Arduino IDE
baud = 115200                     # Must match Arduino baud rate
timeout = 5                       # Seconds
filename = "data.csv"

r00tdaemon

Installation

pip3 install --user pyqt5  
sudo apt-get install python3-pyqt5  
sudo apt-get install pyqt5-dev-tools
sudo apt-get install qttools5-dev-tools

---

Configuring to run from terminal

esp8266_mqtt_humtemp

/* ESP8266 + MQTT Humidity and Temperature Node
 * Can also receive commands; adjust messageReceived() function 
 * See MakeUseOf.com for full build guide and instructions
 * Author: James Bruce, 2015
 */

#include <MQTTClient.h>
#include <ESP8266WiFi.h>
#include <DHT.h>

rustyconover

#include <stdio.h>

int collatz_count_until_1(unsigned int n) {
  int count = 0;
  while(n != 1) {
    if(n % 2 == 0) {
      n /= 2;
    } else {
      n = (3 * n) + 1;
    }

NearLinHere

#define SCL     TRISB4   // I2C bus
#define SDA     TRISB1   //
#define SCL_IN  RB4    //
#define SDA_IN  RB1    //

// initialize
SDA = SCL = 1 ;
SCL_IN = SDA_IN = 0 ;

// make master wait

cdiener

import sys; from PIL import Image; import numpy as np

chars = np.asarray(list(' .,:;irsXA253hMHGS#9B&@'))

if len(sys.argv) != 4: print( 'Usage: ./asciinator.py image scale factor' ); sys.exit()
f, SC, GCF, WCF = sys.argv[1], float(sys.argv[2]), float(sys.argv[3]), 7/4

img = Image.open(f)
S = ( round(img.size[0]*SC*WCF), round(img.size[1]*SC) )
img = np.sum( np.asarray( img.resize(S) ), axis=2)

vo

#!/usr/bin/env python

import sys, os
from optparse import OptionParser

# tell python where to find mavlink so we can import it
sys.path.append(os.path.join(os.path.dirname(os.path.realpath(__file__)), '../mavlink'))
from pymavlink import mavutil

def handle_heartbeat(msg):