aider-commit

A simple wrapper for using aider to create commits with automatically generated messages using AI. Includes a few extra checks and outputs.

Installation

mdeweerd / proxmox-realtek-r8168.md

Last active March 3, 2025 00:06 — forked from tushroy/proxmox-realtek-r8168.md

Realtek r8168 Driver for Proxmox VE Kernel version 6.8

Blacklist r8169 kernel driver for being loaded

echo blacklist r8169 >> /etc/modprobe.d/blacklist-r8169.conf

Once all of this is completed we are going to update our GRUB to have some specific kernel parameters for our realtek driver

mdeweerd / bathroom-humidity-exhaust-fan.yaml

Last active December 27, 2024 22:31 — forked from Blackshome/bathroom-humidity-exhaust-fan.yaml

bathroom-humidity-exhaust-fan.yaml

	blueprint:
	name: Bathroom Humidity Exhaust Fan
	description: \|
	# 🚿 Bathroom Humidity Exhaust Fan

	Version: 2.6


	Step into the future of freshness - customize it your way and experience the convenience of automated humidity control! 🌿🚿

mdeweerd / build.bat

Last active March 3, 2025 15:20 — forked from GaryLee/build.bat

Build STM32CubeIDE project from command line.

	@ECHO OFF
	setlocal enabledelayedexpansion

	set "STM32CUBEIDE="
	for /d /r "C:\ST" %%d in ("STM32CubeIDE_*") do (
	if not defined STM32CUBEIDE (
	set "STM32CUBEIDE=%%~fd"
	) else (
	for /f "tokens=2 delims=_." %%a in ("%%~nd") do (
	for /f "tokens=2 delims=_." %%b in ("!STM32CUBEIDE:_= !") do (

mdeweerd / fix-links.lua

Last active September 24, 2023 20:49 — forked from MyriaCore/fix-links.lua

How to use pandoc with gitlab markdown

	-- see if the file exists
	function file_exists(file)
	local f = io.open(file, "rb")
	if f then f:close() end
	return f ~= nil
	end

	function escape_shell(s)
	-- From https://github.com/ncopa/lua-shell/blob/master/shell.lua
	if s:match("[^A-Za-z0-9_/:=-]") then

mdeweerd / renew_ssl_cert.yaml

Last active September 18, 2025 18:51 — forked from e28eta/renew_ssl_cert.yaml

Homeassistant Blueprint for SSL-Certificate renewal

	---
	blueprint:
	name: Renew Let's Encrypt Certificate
	description: Renew Certificate when due date is below given value
	domain: automation
	input:
	cert_expiry_sensor:
	name: Certificate Expiry Sensor
	description: "Sensor from the Certificate Expiry Integration (https://www.home-assistant.io/integrations/cert_expiry)"
	selector:

mdeweerd / rc.local

Created May 25, 2022 17:57 — forked from dunkelstern/rc.local

iptables rules for vpn config

	# for ISAKMP (handling of security associations)
	iptables -A INPUT -p udp --dport 500 --j ACCEPT
	# for NAT-T (handling of IPsec between natted devices)
	iptables -A INPUT -p udp --dport 4500 --j ACCEPT
	# for ESP payload (the encrypted data packets)
	iptables -A INPUT -p esp -j ACCEPT
	# for the routing of packets on the server
	iptables -t nat -A POSTROUTING -j SNAT --to-source %IP% -o eth0
	# internet access
	iptables -t nat -A POSTROUTING -s 10.0.42.0/24 -o eth0 -m policy --dir out --pol ipsec -j ACCEPT

mdeweerd / motion_controlled_scenes_with_sun_elevation_check.yaml

Created November 6, 2021 16:39 — forked from Martinnygaard/motion_controlled_scenes_with_sun_elevation_check.yaml

Homeassistant blueprint for motion-activated light scene with sun elevation sensor

	blueprint:
	name: Motion-activated light scene with optional ambient scene with sun elevation sensor
	description: Turn on a light scene when motion is detected and the sun is below given threshold. Four different scenes can be defined depending on time of day.
	domain: automation
	source_url: https://gist.github.com/Martinnygaard/7645dcee2ca03d18c7a9523aa592605b
	input:
	motion_entity:
	name: Motion Sensor
	description: Choose which motion sensor to use. If multiple motion sensors should trigger this automation, then group them in a template sensor or regular group.
	selector:

mdeweerd / YouTube Video Data Tool.html

Last active October 31, 2021 13:25 — forked from jgrant41475/YouTube Video Data Tool.html

Fetches YouTube Video Information and creates a json-ld Video Object

	<!doctype html>
	<html class="no-js" lang="en">
	<head>
	<meta charset="utf-8" />
	<meta name="viewport" content="width=device-width, initial-scale=1.0" />
	<title>Foundation \| Welcome</title>
	<!-- <link rel="stylesheet" href="css/foundation.css" /> -->
	<link rel="stylesheet" href="https://cdnjs.cloudflare.com/ajax/libs/foundation/6.7.3/css/foundation.min.css" integrity="sha512-2meDMHyoDRV8O0gr5Diq32ch+6QqI9Af9Km4eFwgxZg356CbUI4S30C3zuUetkNAN4Bn+17y9OgxoQ3HnQ648w==" crossorigin="anonymous" referrerpolicy="no-referrer" />
	</head>
	<body>

mdeweerd / convert_shape.py

Last active December 3, 2023 15:21 — forked from slazav/convert_shape.py

Convert OpenSCAD files to STEP or IGES using FreeCAD python library

	#!/usr/bin/env /cygdrive/c/Program Files/FreeCAD 0.21/bin/python
	#!/usr/bin/env /cygdrive/c/Program Files/FreeCAD 0.20/bin/python
	#!/usr/bin/env python3
	#!/usr/bin/env /cygdrive/c/Program Files/FreeCAD 0.20/bin/FreeCAD
	#!/usr/bin/env /cygdrive/c/Program Files/FreeCAD 0.20/bin/FreeCADCmd
	#!/usr/bin/freecad
	#!/usr/bin/python
	# (Options above for reminder, easy exchange of lines to adapt to local platform).
	# /!\ Launch this script using the python provided/used by FreeCAD
	# (Select/add the appropriate line above)