This is a quick file to let you build a Xiaomi Mi Band 2 charger with a laser cutter.
The design is licensed CC-BY-SA 4.0.
Materials:
| Dumping dumps/anonymt_dump-20120814.mfd: | |
| CMI: {'CardSerialNumber': aa9035d8, | |
| 'CardSerialNumberCheckByte': d7, | |
| 'ManufacturerData': bitarray('0000100100001001000000000100010111010011110101011000111001100100000000000000001010011000'), | |
| 'CalculatedCardSerialNumberCheckByte': d7 | |
| } | |
| TCCI: {'MADInfoByte': bitarray('0000000000000000'), | |
| 'CardVersion': Integer 4 (bitarray('000100')), | |
| 'CardProvider': PTA be00: Rejsekortet A/S, | |
| 'CardValidityEndDate': DateCompact: 6573 2014-12-31 bitarray('01100110101101'), |
| // teensy_steno | |
| // Michael Farrell <[email protected]> | |
| // | |
| // This implements the TX Bolt protocol. It works with Teensy LC, but should work | |
| // with other Arduino compatibles (once you fix touch inputs). | |
| // | |
| // This version supports arbitrary keymaps, so you don't need to wire the keyboard | |
| // the same as the TX Bolt protocol. This should make scanning around twice as fast. | |
| // | |
| // This uses a "touch" sensitive pin (18) for the number bar. |
| <html> | |
| <head> | |
| <style type="text/css"> | |
| html { | |
| background: repeating-linear-gradient( | |
| 90deg, | |
| #000, | |
| #000 2px, | |
| #fff 2px, |
| #!/usr/bin/env python | |
| # -*- mode: python; indent-tabs-mode: nil; tab-width: 2 -*- | |
| """ | |
| greencard_reader.py | |
| Prototype reader for Greencard (TAS) card dumps. | |
| See https://github.com/micolous/metrodroid/wiki/Greencard for format details. | |
| Copyright 2017 Michael Farrell <[email protected]> | |
| Note: This loads the entire file into memory blindly. Do not use on large file |
| #!/usr/bin/env python | |
| # -*- mode: python; indent-tabs-mode: nil; tab-width: 2 -*- | |
| """ | |
| myway_reader.py | |
| Prototype reader for MyWay (ACT) card dumps. | |
| See https://github.com/micolous/metrodroid/wiki/MyWay for format details. | |
| Copyright 2016 Michael Farrell <[email protected]> | |
| Note: This loads the entire file into memory blindly. Do not use on large file |
| { | |
| "info": { | |
| "version": "1.0", | |
| "license": { | |
| "url": "https://creativecommons.org/licenses/by/4.0/legalcode", | |
| "name": "CC-BY-4.0" | |
| }, | |
| "title": "Transport for NSW Open Data API" | |
| }, | |
| "paths": { |
| #!/bin/sh | |
| ffmpeg -y \ | |
| -f v4l2 \ | |
| -input_format mjpeg \ | |
| -i /dev/video0 \ | |
| -framerate 25 \ | |
| -video_size 640x360 \ | |
| -s 1280x720 \ | |
| -c:v rawvideo -c:a pcm_s16le \ | |
| -pix_fmt yuv420p \ |
| import argparse, struct, base64, datetime | |
| MODES = { | |
| 1: 'Value-add machine', | |
| 4: 'Bus', | |
| 5: 'Train', | |
| 18: 'Ferry', | |
| } | |
| STATIONS = { |
| from abbreviations import abbreviations | |
| from sys import argv | |
| import re | |
| # get all the commandline text | |
| in_str = ' '.join(argv[1:]).upper() | |
| # compile a regular expression for each of the stations, do this only on startup, because it is slow (~240 ms) | |
| abb_re = {} | |
| for k, v in abbreviations.iteritems(): |
