Skip to content

Instantly share code, notes, and snippets.

View mikhailbot's full-sized avatar
🐺

Mikhail mikhailbot

🐺
18 followers · 33 following
View GitHub Profile
@axemann
axemann / librenms_linux_mon_setup.txt
Last active February 15, 2025 20:18
LibreNMS Linux server monitoring setup (Ubuntu)
sudo apt-get install snmpd -y
sudo mv /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf.old
sudo su -
sudo cat > /etc/snmp/snmpd.conf << EOF
# Change public below to your preferred SNMP community string
com2sec readonly default public
group MyROGroup v2c readonly
view all included .1 80
access MyROGroup "" any noauth exact all none none
@blacktwin
blacktwin / find_unwatched.py
Last active December 11, 2018 03:40
Find what was added TFRAME ago and not watched using PlexPy.
"""
Find what was added TFRAME ago and not watched using PlexPy.
"""
import requests
import sys
import time
@blacktwin
blacktwin / find_unwatched_notify.py
Last active December 11, 2018 03:23
Find what was added TFRAME ago and not watched and notify admin using PlexPy.
"""
Find what was added TFRAME ago and not watched and notify admin using PlexPy.
"""
import requests
import sys
import time
@chrismccord
chrismccord / upgrade.md
Last active April 7, 2023 12:03
Phoenix 1.2.x to 1.3.0 Upgrade Instructions

If you want a run-down of the 1.3 changes and the design decisions behidn those changes, check out the LonestarElixir Phoenix 1.3 keynote: https://www.youtube.com/watch?v=tMO28ar0lW8

To use the new phx.new project generator, you can install the archive with the following command:

$ mix archive.install https://github.com/phoenixframework/archives/raw/master/phx_new.ez

Bump your phoenix dep

Phoenix v1.3.0 is a backwards compatible release with v1.2.x. To upgrade your existing 1.2.x project, simply bump your phoenix dependency in mix.exs:

@blacktwin
blacktwin / create_wait_kill_all.py
Last active June 11, 2018 16:43
Receive session_key from PlexPy when paused. Use session_id to create sub-script to wait for X time then check if still paused. If paused kill.
'''
fetch function from https://gist.github.com/Hellowlol/ee47b6534410b1880e19
PlexPy > Settings > Notification Agents > Scripts > Bell icon:
[X] Notify on pause
PlexPy > Settings > Notification Agents > Scripts > Gear icon:
Playback Pause: create_wait_kill_all.py
PlexPy > Settings > Notifications > Script > Script Arguments:
{session_key}
@nerdcave
nerdcave / environment.js
Last active May 11, 2021 12:27
PurgeCSS config for Rails 5 and Webpacker (along with Tailwind CSS and Vue.js, in this case)
// first run:
// yarn add glob-all purgecss-webpack-plugin --dev
/*
config/webpack/environment.js
PurgeCSS configuration for Rails 5 + Webpacker + Tailwind CSS + Vue.js
Optionally, put this in production.js if you only want this to apply to production.
For example, your app is large and you want to optimize dev compilation speed.
*/
@binoclard
binoclard / Statamic+Tailwind+PurgeCSS.md
Last active November 15, 2021 22:19
Fresh Statamic install, with Tailwind CSS and PurgeCSS configured

Fresh Statamic install, with Tailwind CSS and PurgeCSS configured

In 5 minutes, you’ll have a brand new clean Statamic site, with Tailwind CSS and PurgeCSS configured.

It assumes that you work on a Mac, you put your site in ~/sites and you use Laravel Valet.

All the credit go to Jack McDade and philipboomy, from whom I stole and adapt the build scripts and the PurgeCSS config, because I have really absolutely no idea what I am doing with all this Terminal Black Magic ™; this is only a detailed write up of the process.

You'll need Yarn and Node. You can install them both in one command via Brew: brew install yarn

@NickCraver
NickCraver / Overview.json
Created March 12, 2019 01:47
Craver's UniFi dashboard layout
{"name":"Overview","desc":"System Overview","controller_version":"5.10.12","modules":[{"id":"default:mega|status","module_id":"mega|status","restrictions":{"removable":false,"draggable":false},"config":{}},{"module_id":"summary|wifi","config":{},"id":"13a78652-ad84-4fcb-943a-86929c638353"},{"module_id":"clients|freq-distribution","config":{"palette":"BLUE_GRADIENT_10"},"id":"c9626f4f-021f-4d46-b22d-86007570bac7"},{"module_id":"clients|top5|active","config":{"trafficType":"total"},"id":"36a9e071-132e-4b4a-baee-250449a6d44f"},{"module_id":"devices|uap|top5|channel-util","config":{"trafficType":"total"},"id":"9803f077-b9cd-4db0-b466-60d92fae2020"},{"module_id":"devices|uap|top5|active","config":{"trafficType":"total"},"id":"e6133049-cc56-44b3-a4c2-b0843912dac5"},{"module_id":"devices|uap|top5|client-count","config":{},"id":"d39f9c80-1827-4ba0-b573-3209789c56b5"},{"module_id":"summary|switching","config":{},"id":"5966437b-54f7-43e6-9c03-2adbdeb3c0a6"},{"module_id":"devices|usw|top5|active","config":{},"id":"c83ac
@ttscoff
ttscoff / sizes.rb
Last active July 12, 2021 03:33
sizes: Calculate and sort all filesizes for current folder
#!/usr/bin/env ruby
# Sizes - Calculate and sort all filesizes for current folder Includes
# directory sizes, colorized output Brett Terpstra 2019 WTF License
VERSION = "1.0.1"
require 'shellwords'
# Just including term-ansicolor by @flori and avoiding all the
# rigamarole of requiring multiple files when it's not a gem... - Brett
#
@jackmcdade
jackmcdade / globals.yaml
Created July 3, 2019 16:33
Statamic Fieldset for Head and Footer Scripts
title: 'Site Settings'
hide: true
sections:
main:
fields:
head_scripts:
mode: table
fields:
description:
type: text