mitchtech

#!/usr/bin/env python

import time
import os

STEP = 100
DELAY = 0.5

def pwm(pin, angle):
    print "servo[" + str(pin) + "][" + str(angle) + "]"

mitchtech

#!/usr/bin/env python
import smtplib
from email.MIMEMultipart import MIMEMultipart
from email.MIMEBase import MIMEBase
from email.MIMEText import MIMEText
from email.Utils import COMMASPACE, formatdate
from email import Encoders
import os

USERNAME = "[email protected]"

mitchtech

#!/usr/bin/env python
import smtplib
from email.mime.text import MIMEText

USERNAME = "[email protected]"
PASSWORD = "password"
MAILTO  = "[email protected]"

msg = MIMEText('This is the body of the email')
msg['Subject'] = 'The email subject'

mitchtech

#!/usr/bin/env python
import feedparser

USERNAME = "[email protected]"
PASSWORD = "password"

response = feedparser.parse("https://" + USERNAME + ":" + PASSWORD + "@mail.google.com/gmail/feed/atom")
unread_count = int(response["feed"]["fullcount"])

for i in range(0,unread_count):

mitchtech

/*******************************************************
* SerialServoControl Sketch
* Written by Ryan Owens for SparkFun Electronics
* 7/15/11
*
* This sketch listens to serial commands and uses the data
* to set the position of two servos.
*
* Serial Command Structure: 2 bytes - [ID Byte][Servo Position byte]
* ID byte should be 0 or 1.

mitchtech

#!/usr/bin/env python
import serial, sys, time, psutil

# Assign Arduino's serial port address
#   Windows example
#     usbport = 'COM3'
#   Linux example
#     usbport = '/dev/ttyUSB0'
#   MacOSX example
#     usbport = '/dev/tty.usbserial-FTALLOK2'

mitchtech

import RPi.GPIO as GPIO, feedparser
USERNAME="[email protected]"
PASSWORD="password"
GPIO_PIN=12
GPIO.setmode(GPIO.BOARD)
GPIO.setup(GPIO_PIN, GPIO.OUT)
newmails = int(feedparser.parse("https://" + USERNAME + ":" + PASSWORD + "@mail.google.com/gmail/feed/atom")["feed"]["fullcount"])
if newmails > 0: 
	GPIO.output(GPIO_PIN, True)
else: 

mitchtech

/* Arduino USB Keyboard HID demo
 * Cut/Copy/Paste Keys
 */

#define KEY_LEFT_CTRL	0x01
#define KEY_LEFT_SHIFT	0x02
#define KEY_RIGHT_CTRL	0x10
#define KEY_RIGHT_SHIFT	0x20

uint8_t buf[8] = { 

mitchtech

/* Arduino USB HID Keyboard Demo
 * Random Key/Random Delay
 */

uint8_t buf[8] = { 
  0 }; 	/* Keyboard report buffer */

void setup() 
{
  Serial.begin(9600);

mitchtech

/* Arduino USB Keyboard HID demo
 * Volume+/Volume-/Mute keys
 */

uint8_t buf[8] = { 
  0 }; 	/* Keyboard report buffer */

#define PIN_VOLUME_UP 5
#define PIN_VOLUME_DOWN 6
#define PIN_MUTE 7