Skip to content

Instantly share code, notes, and snippets.

View mxi1's full-sized avatar

Minjun mxi1

21 followers · 30 following
  • Nokia
  • Beijing
View GitHub Profile
@lanceliao
lanceliao / 1-redsocks2-openwrt.md
Last active April 13, 2025 10:33
在OpenWrt上配置redsocks2

redsocks2是一款透明socks5代理工具，能够实现智能代理的功能，这里是redsocks2在OpenWrt上的配置，配合shadowsocks使用。

redsocks.conf 是配置文件，放在/etc目录，将192.168.1.1改成路由器的地址. redsocks2.sh 为自启动文件，改名为redsocks2放到/etc/init.d目录即可。自启动文件假设redsocks可执行文件在/opt/bin目录。

启动redsocks2: /etc/init.d/redsocks2 start 停止redsocks2: /etc/init.d/redsocks2 stop

redsocks2 git源

@hazcod
hazcod / gist:e9c0e600e0c8d0f72f4f
Last active December 11, 2020 06:34
How to setup Xbox 360 (wireless) controller on xbian
ssh xbian@IP_OF_YOUR_XBIAN
sudo apt-get install xboxdrv
mkdir xbox
nano xbox/mapping
```
[xboxdrv]
silent = true
ui-clear = true
@pavel-odintsov
pavel-odintsov / ixgbe-single-queue.diff
Last active March 27, 2019 07:40 — forked from majek/ixgbe-single-queue.diff
diff -Nraup ixgbe-linux-netmap/ixgbe-3.23.2.1/src/ixgbe_main.c ixgbe-linux-netmap-single-queue/ixgbe-3.23.2.1/src/ixgbe_main.c
--- ixgbe-linux-netmap/ixgbe-3.23.2.1/src/ixgbe_main.c 2015-06-20 14:23:38.457783634 +0100
+++ ixgbe-linux-netmap-single-queue/ixgbe-3.23.2.1/src/ixgbe_main.c 2015-06-20 14:23:31.330496612 +0100
@@ -686,6 +686,7 @@ static bool ixgbe_clean_tx_irq(struct ix
if (test_bit(__IXGBE_DOWN, &adapter->state))
return true;
+ if (tx_ring->queue_index == 0) {
#ifdef DEV_NETMAP
/*
@bittner
bittner / 60-jetbrains.conf
Created September 25, 2015 07:57
Inotify configuration for IntelliJ IDEA (PhpStorm, PyCharm, RubyMine, WebStorm). Create this file with e.g. `sudo vim /etc/sysctl.d/60-jetbrains.conf`
# Set inotify watch limit high enough for IntelliJ IDEA (PhpStorm, PyCharm, RubyMine, WebStorm).
# Create this file as /etc/sysctl.d/60-jetbrains.conf (Debian, Ubuntu), and
# run `sudo service procps start` or reboot.
# Source: https://confluence.jetbrains.com/display/IDEADEV/Inotify+Watches+Limit
#
# More information resources:
# -$ man inotify # manpage
# -$ man sysctl.conf # manpage
# -$ cat /proc/sys/fs/inotify/max_user_watches # print current value in use
@CMCDragonkai
CMCDragonkai / Network_Communication_Protocols_Map.pdf
Last active May 13, 2025 07:31
Network Protocol Map
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
@adricasti
adricasti / Readme.md
Last active June 24, 2020 18:59
nRF52 Toolchain Setup in Mac OS X

Equipment

  • MacOS Mojave 10.14.4
  • MacBook Pro (Retina, 13-inch, Late 2012)
  • nRF52-DK (PCA10040)

Toolchain Setup

  1. Install GCC
@machinekoder
machinekoder / Emacs.kms
Last active March 16, 2025 04:47
Emacs keys for Qt Creator
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE KeyboardMappingScheme>
<!-- Written by Qt Creator 4.2.1, 2017-03-27T21:24:06. -->
<mapping>
<shortcut id="CppTools.OpenHeaderSourceInNextSplit">
<key value="Ctrl+E, F4"/>
</shortcut>
<shortcut id="CppTools.SwitchHeaderSource">
<key value="F4"/>
</shortcut>
@Azoy
Azoy / install-swift-ubuntu.md
Last active December 9, 2022 03:42
Guide on how to install Swift on Ubuntu

Install Swift on Ubuntu

Requirements

  1. Ubuntu 14.04, 16.04, or 16.10

Step 1 - Dependencies

  1. Open up terminal
  2. Install core deps: sudo apt-get install clang libicu-dev git

Step 1.1 - Ubuntu 14.04 Clang

@extremecoders-re
extremecoders-re / debian-mipsel-on-qemu.md
Last active September 24, 2023 20:10
Installing debian stretch mipsel on qemu
@stefancocora
stefancocora / vpn-openconnect-connect-to-cisco-anyconnect.md
Created September 25, 2017 08:48
Split tunneling with openconnect - A guide on how to use openconnect to establish a vpn connection to an enterprise cisco anyconnect vpn endpoint with client side routing.

Introduction

The purpose of this short howto is to show you how to:

  • use openconnect [1] to connect to an enterprise cisco anyconnect endpoint
  • whilst minimizing the amount of traffic that your route through the vpn connection

Usually VPN administrators will puth the default route to the users, so that all user traffic is routed through the vpn connection. This is to address the various security concerns around compromised user computers bridging external internet traffic into the secure VPN network.

While the VPN administrator can push routes to the clients, the client can ignore these default routes and establish client side routing so that only the required A.B.C.D/E network is routed through the VPN. All other traffic will still use the clients default route and default outbound internet connection.