Noë Charlier n005

Gowin EDA V1.9.9.03 Education Linux

On Debian Testing/trixie. With some adaptions the instructions described here should also work on other Linux distributions.

As regular user extract the Gowin EDA tarball into a directory e.g. gowin. This creates two directories, IDE and Programmer:

gowin/
├── IDE
├── Programmer

How to download from pan.baidu.com

Update: https://baidu.kinh.cc is no longer working, Please use https://baidu.erranium.com for limited free downloads and paid downloads.

Also to support the author you can checkout the amazing free resources at https://www.youtube.com/@algoflyai/videos a sub will be appreciated.

Disclaimer:

This methods uses a 3rd party website: https://baidu.kinh.cc/.

WireGuard Routing without NAT

WireGuard Configuration

Remove the iptables masquerade rule from the post-up and post-down section of the WireGuard configuraiton file.

iptables -t nat -A POSTROUTING -o {{ lan_interface }} -j MASQUERADE

How to install Modelsim and Quartus on Fedora 32 and Ubuntu 20.04

I tried these steps in virtual machines with these OSes, and successfully got Modelsim and Quartus to open.

Update your system.

Fedora:
```
sudo dnf upgrade --refresh
```
Ubuntu:

Cloud images in Proxmox

A script which automates these steps for multiple distros incl. CoreOS, CentOS, Arch and ALpine

create-cloud-template.sh

Steps for creating an Ubuntu 18.04 cloud template

Using a ready-to-use Ubuntu image

An Ansible summary

Jon Warbrick, July 2014, V3.2 (for Ansible 1.7)

Configuration file

intro_configuration.html

First one found from of

Restore the GRUB Bootloader on Manjaro

Chroot into your linux instalation
1. The easiest way is with mhwd-chroot
  1. Install it yaourt -S mhwd-chroot
  2. Run it sudo mhwd-chroot
  3. DONE, you have chrooted into your linux installation (open a root console of your installed linux OS, is like just open a console with root access)
Restore your GRUB
1. Install a new GRUB bootloader with grub-install /dev/sda
Recheck to ensure the that installation has completed without any errors grub-install --recheck /dev/sda

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

	{
	"0":{
	"day":{
	"description":"Sunny",
	"image":"http://openweathermap.org/img/wn/[email protected]"
	},
	"night":{
	"description":"Clear",
	"image":"http://openweathermap.org/img/wn/[email protected]"
	}

	[Trigger]
	Operation = Remove
	Type = Package
	Target = *

	[Action]
	Description = Clearing cache...
	When = PostTransaction
	Exec = /home/<user>/.local/bin/tools/removehook