nanosonde nanosonde

Build ios app for iphoneos sdk with signing using Travis ci.

Export your private key that you are going to use for signing from Keychain Access app to ~/privateKey.p12 with export password __YourRandomPass22
Fetch script and run it from your Travis-enabled target iOS app repo: IOS_IDENTITY_KEY=~/privateKey.p12 IOS_IDENTITY_KEY_PASSWORD=__YourRandomPass22 bash <(curl -s https://gist.githubusercontent.com/darvin/96a3af399d0b970a59b1/raw/setup_travis_ios_signing.sh)
Review changes and commit. It suppose to work now.

Compatibility

I currently run Ubiquiti's UniFi Controller on a Raspberry Pi 3B without issue. I have tried with a Raspberry Pi 1B, but the application crashes on startup. I assume it is due to a lack of RAM. Presumably, it would run on a Raspberry Pi 2B as well (same amount of RAM), but I have not tested it on this model. YMMV.

Instructions

Install Raspbian on a SD card. I tested this with Jessie Lite (headless)
Use raspi-config to expand the filesystem, rename your PI, etc

Example devices

Inkbird IBT-2X
Inkbird IBT-4XS
EasyBBQ FCCID: FCC ID 2AI4MPRO3 (SHENZHEN HYPERSYNES CO.,LTD Smart Wireless Thermometer PRO3)

Properties

@ConnectTimeout: 60 seconds
@BatteryPollingInterval: 5 minutes

The iBBQ is a Bluetooth LE Gatt Device

OpenWRT-NPTv6-scripts

LICENSE

WTFPL

Note

File iptables-nptv6.sh is tested on OpenWRT 19.07 it's use iptables as network filter tool.
File nptv6.sh is tested on OpenWRT 23.05, and use nftables as network filter tool. It also keep iptables compatibility but no tested. If have any issue, please comment at below (suggested) or email me.

Scenario

You're running a KVM-based virtualization. You want to do PCI/PCIe passthrough of some device. You don't want it to attach to the host OS at all.

Your device looks like that:

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller [8086:1c02] (rev 05)
	Subsystem: Hewlett-Packard Company 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [103c:330d]
	Kernel driver in use: ahci
	Kernel modules: ahci

	#!/bin/bash
	#
	# Watch current directory (recursively) for file changes, and execute
	# a command when a file or directory is created, modified or deleted.
	#
	# Written by: Senko Rasic <[email protected]>
	#
	# Requires Linux, bash and inotifywait (from inotify-tools package).
	#
	# To avoid executing the command multiple times when a sequence of

	<?php

	interface Worker
	{
	public function getCommand();
	public function done($stdout, $stderr);
	public function fail($stdout, $stderr, $status);
	}

	#!/bin/bash
	# Author: Fabien Poussin
	# Last edit: 20/11/2014
	#
	# You will need the following mingw32/64 or equivalent linux packages to build it:
	# msys gcc msys-coreutils msys-wget msys-autoconf msys-automake msys-mktemp
	#
	# Use mingw-get to install these.
	# run this script from msys's or any unix console.

	# Mirror of the instructions available here:
	# http://www.lowefamily.com.au/2016/06/02/installing-ubiquiti-unifi-controller-5-on-raspberry-pi/
	#
	# These commands CANNOT be run in a script.
	# They're just for reference.


	# Install on Raspbian Jessie, or upgrade from Wheezy.
	# Make sure all packages are upgraded (update && upgrade).

	#!/bin/bash
	#
	# Credits to fuckbecauseican5 from https://www.reddit.com/r/hackintosh/comments/4s561a/macos_sierra_16a238m_install_success_and_guide/
	# Adapted to work with the official image available into Mac App Store
	#
	# Enjoy!

	hdiutil attach /Applications/Install\ macOS\ Sierra.app/Contents/SharedSupport/InstallESD.dmg -noverify -nobrowse -mountpoint /Volumes/install_app
	hdiutil create -o /tmp/Sierra.cdr -size 7316m -layout SPUD -fs HFS+J
	hdiutil attach /tmp/Sierra.cdr.dmg -noverify -nobrowse -mountpoint /Volumes/install_build