flatz

Remote Package Installer

Package link: https://mega.nz/#!2dN1XajB!Z5fXyFoKOXFI_ujgGoCZfFFy5nyn7OWo6vF6h_HmWhQ

Requirements:
  Any exploit on 4.5x+
  HEN 1.8 (you could get it from zecoxao's page) or any other kernel payload (it just need to have fPKG stuff and /data mount patches for ShellCore that I've posted recently)
  
Changelog:
  [+] Added CORS header to interact with browser's AJAX

y0ngb1n

Docker Hub 镜像加速器

国内从 Docker Hub 拉取镜像有时会遇到困难，此时可以配置镜像加速器。

Dockerized 实践 https://github.com/y0ngb1n/dockerized

1️⃣ Docker daemon 配置代理（推荐）

参考 Docker daemon 配置代理

zoilomora

How to disable systemd-resolved in Ubuntu

Stages

• Disable and stop the systemd-resolved service:

    sudo systemctl disable systemd-resolved.service
    sudo systemctl stop systemd-resolved
  

• Then put the following line in the [main] section of your /etc/NetworkManager/NetworkManager.conf:

monperrus

modeset:Use kernel modesetting [KMS] (0=disable, 1=on, -1=force vga console preference [default]) (int)
enable_dc:Enable power-saving display C-states. (-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6) (int)
enable_fbc:Enable frame buffer compression for power savings (default: -1 (use per-chip default)) (int)
lvds_channel_mode:Specify LVDS channel mode (0=probe BIOS [default], 1=single-channel, 2=dual-channel) (int)
panel_use_ssc:Use Spread Spectrum Clock with panels [LVDS/eDP] (default: auto from VBT) (int)
vbt_sdvo_panel_type:Override/Ignore selection of SDVO panel mode in the VBT (-2=ignore, -1=auto [default], index in VBT BIOS table) (int)
reset:Attempt GPU resets (0=disabled, 1=full gpu reset, 2=engine reset [default]) (int)
vbt_firmware:Load VBT from specified file under /lib/firmware (charp)
error_capture:Record the GPU state following a hang. This information in /sys/class/drm/card<N>/error is vital for triaging and debugging hangs. (bool)
enable_hangcheck:Periodically check GPU activity for d

triangletodd

On the host

Ensure these modules are loaded

cat /proc/sys/net/bridge/bridge-nf-call-iptables

Disable swap

sysctl vm.swappiness=0
swapoff -a

sindresorhus

Pure ESM package

The package that linked you here is now pure ESM. It cannot be require()'d from CommonJS.

This means you have the following choices:

1. Use ESM yourself. (preferred)
   Use import foo from 'foo' instead of const foo = require('foo') to import the package. You also need to put "type": "module" in your package.json and more. Follow the below guide.
2. If the package is used in an async context, you could use await import(…) from CommonJS instead of require(…).
3. Stay on the existing version of the package until you can move to ESM.

sleirsgoevy

<script>
var PAGE_SIZE = 16384;
var SIZEOF_CSS_FONT_FACE = 0xb8;
var HASHMAP_BUCKET = 208;
var STRING_OFFSET = 20;
var SPRAY_FONTS = 0x1000;
var GUESS_FONT = 0x200430000;
var NPAGES = 20;
var INVALID_POINTER = 0;
var HAMMER_FONT_NAME = "font8"; //must take bucket 3 of 8 (counting from zero)

jmatsushita

###
### [2023-06-19] UPDATE: Just tried to use my instructions again on a fresh install and it failed in a number of places. 
###.   Not sure if I'll update this gist (though I realise it seems to still have some traffic), but here's a list of 
###.   things to watch out for:
###      - Check out the `nix-darwin` instructions, as they have changed.
###      - There's a home manager gotcha https://github.com/nix-community/home-manager/issues/4026
###

# I found some good resources but they seem to do a bit too much (maybe from a time when there were more bugs).
# So here's a minimal Gist which worked for me as an install on a new M1 Pro.

Nexarian

#!/usr/bin/env bash

set -e

cd ~

sudo -v

# Make sure system is in a good, updated, clean, state.
sudo apt-get -y update

scyto

Enable & Using vGPU Passthrough

This gist is almost entirely not unlike Derek Seaman's awesome blog:

Proxmox VE 8: Windows 11 vGPU (VT-d) Passthrough with Intel Alder Lake

As such please refer to that for pictures, here i will capture the command lines I used as i sequence the commands a little differently so it makes more logic to me.

This gists assumes you are not running ZFS and are not passing any other PCIE devices (as both of these can require addtional steps - see Derek's blog for more info)

This gist assumes you are not running proxmox in UEFI Secure boot - if you are please refer entirely to dereks blog.