Skip to content

Instantly share code, notes, and snippets.

View nraynaud's full-sized avatar
🌵
learning new things

Nicolas Raynaud nraynaud

🌵
learning new things
158 followers · 5 following
View GitHub Profile
@nraynaud
nraynaud / Save Tool Offsets.g
Created March 20, 2020 20:57
Saving probed tool offset in duet wifi
M500 P10
@nraynaud
nraynaud / 10 Probe Tool Z.g
Last active March 20, 2020 20:56
How to use M585 in Duet wifi
G53 G0 Z30 F10000
G0 X419.2 Y2.6 F10000
M585 F200 Z-23.6 P0 S1 ;
G0 Z30 F10000
@nraynaud
nraynaud / dxf_color.cps
Last active February 16, 2022 23:18
A Fusion 360 DXF post processor whose output uses one color per operation, useful for users of Lasercut 5.3. See: https://www.reddit.com/r/ChineseLaserCutters/comments/b793x5/i_improved_the_dxf_post_processor_for_fusion_360/
/**
Copyright (C) 2015-2018 by Autodesk, Inc.
All rights reserved.
Altered by nraynaud
*/
description = "Color AutoCAD DXF";
vendor = "Autodesk/nraynaud";
vendorUrl = "http://www.autodesk.com";
@nraynaud
nraynaud / main.rs
Created January 15, 2019 19:14
//! Blinks an LED
#![deny(unsafe_code)]
#![no_std]
#![no_main]
//MCU: STM32F103C8T699
extern crate panic_halt;
use rtfm::{app, Instant, Duration};
use stm32f103xx_hal::{
@nraynaud
nraynaud / blktap.spec
Created June 18, 2018 16:18
Summary: blktap user space utilities
Name: blktap
Version: 3.5.0
Release: 1.12test
License: BSD
Group: System/Hypervisor
URL: https://github.com/xapi-project/blktap
Patch0: pull_request_228__CA-222124_Handle_race_condition_in_tap-ctl_spawn
Patch1: pull_request_229__ca-223652__add_delay_to_reduce_number_of_syslog_messages
Patch2: pull_request_231__cp-14449__fix_version_and_release_tag_in_specfile
@nraynaud
nraynaud / config.g
Created June 15, 2018 20:31
; Configuration file for Duet WiFi (firmware version 1.17 to 1.19)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool on Wed Nov 15 2017 23:36:04 GMT-0700 (MST)
; General preferences
M111 S0 ; Debugging off
G21 ; Work in millimetres
G90 ; Send absolute coordinates...
M83 ; ...but relative extruder moves
@nraynaud
nraynaud / homez.g
Last active January 1, 2021 15:56
; Lift Z relatively to current position
G91
G1 S2 Z2 F6000
; split Z motor control to Z and U
; for it to work we have to show U (param P4) in the UI
M584 Z2 U3 P4
; Move Z and U down until the switches triggers
G1 S1 Z-205 U-205 F1000
@nraynaud
nraynaud / config.g
Last active November 7, 2019 23:07
M208 X0 Y0 Z0 U0 S1 ; Set axis minima
M208 X210 Y210 Z200 U200 S0 ; Set axis maxima
;DUAL Z
M584 X0 Y1 Z2:3 U3 E4 P3
; Endstops
M574 X1 Y1 Z1 U1 S0 ; Set active low endstops
M558 P0 X0 Y0 Z0 H2 F60 T6000 ; Set Z probe type to switch, the axes for which it is used and the dive height + speeds
G31 P600 X0 Y0 Z0 ; Set Z probe trigger value, offset and trigger height
@nraynaud
nraynaud / homeall.g
Last active November 7, 2019 23:16
; Relative positioning
G91
; Lift Z without endstop protection
G1 S2 Z2 F6000
; Course home X and Y
G1 X-215 Y-215 F4200 S1
; Move away from the endstops
@nraynaud
nraynaud / Readme.md
Last active September 6, 2020 18:49
Unattended installation of Xenserver with iso file

Unattended installation of Xenserver with iso file

  • create answers.xml
  • unpack iso file
    mount sudo mount XenServer-7.1.0-s1-install-cd.iso /mnt
    mkdir newContent
    (cd /mnt; sudo tar cf - .) |  (cd newContent; tar xfp -)