nucleardreamer

<?php
// Group detection by IP address
// 
// [Region Abbreviation, Military/Government]

// Force Varnish to NEVER Cache this page
header("Cache-Control: no-cache, must-revalidate");
header("Expires: Sat, 26 Jul 1997 05:00:00 GMT");

// JSON Headers

nucleardreamer

var _ = require('underscore'),
    util = require('util');

// intercept stdout, passes thru callback
// also pass console.error thru stdout so it goes to callback too
// (stdout.write and stderr.write are both refs to the same stream.write function)
// returns an unhook() function, call when done intercepting
module.exports = function interceptStdout(callback) {
  var old_stdout_write = process.stdout.write,
      old_console_error = console.error;

nucleardreamer

#  Copyright (c) 2015 Bent Cardan

#  Permission is hereby granted, free of charge, to any person obtaining a copy
#  of this software and associated documentation files (the "Software"),
#  to deal in the Software without restriction, including without limitation
#  the rights to use, copy, modify, merge, publish, distribute, sublicense,
#  and/or sell copies of the Software, and to permit persons to whom
#  the Software is furnished to do so, subject to the following conditions:

nucleardreamer

# Install ARCH Linux with encrypted file-system and UEFI
# The official installation guide (https://wiki.archlinux.org/index.php/Installation_Guide) contains a more verbose description.

# Download the archiso image from https://www.archlinux.org/
# Copy to a usb-drive
dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux

# Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration.

# Set swedish keymap

nucleardreamer

M104 S0 ; turn off hotend heater
M140 S0 ; turn off bed heater
G91 ; Switch to use Relative Coordinates
G1 E-3 F700 ; retract the filament a bit before lifting the nozzle to release some of the pressure
G1 Z2 F1000 ; raise platform 2mm from current position
G1 E-2 F700 ; retract filament even more
G90 ; Switch back to using absolute coordinates
G28 X ; Return to home position. Without an X Y or Z after G28 the print completion time will not be displayed on the Mini Delta's display.
M84 ; disable motors
G4 S300 ; pause for 300 seconds to keep fan running to cool hotend and allow the fan to be turned off