_________ _____ _______________ _____
\_ ___ \\ \\___________ \____ / ____\ ~/.bash/cliref.md
/ \ \/| | | || _/ __ \ __\ copy/paste from whatisdb
\ \___|__ |_|_ || | \ __/|_ | http://pastebin.com/yGmGiDQX
\________ /_____ \_||____|_ /____ /_| [email protected]
20160515 \/ 1527 \/ \/ \/
alias CLIRef.txt='curl -s "http://pastebin.com/raw/yGmGiDQX" | less -i'
This is a bash script that will automatically turn your wifi off if you connect your computer to an ethernet connection and turn wifi back on when you unplug your ethernet cable/adapter. If you decide to turn wifi on for whatever reason, it will remember that choice. This was improvised from this mac hint to work with Yosemite, and without hard-coding the adapter names. It's supposed to support growl, but I didn't check that part. I did, however, add OSX notification center support. Feel free to fork and fix any issues you encounter.
Most the credit for these changes go to Dave Holland.
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
| #!/usr/bin/php -d open_basedir=/usr/syno/bin/ddns | |
| <?php | |
| /* | |
| Usage Instructions ( Obviously your domain has to be hosted on Namecheap ) | |
| 1) Copy this file to /usr/syno/bin/ddns/namecheap.php | |
| 2) Add the following entry in /etc.defaults/ddns_provider.conf | |
| [Custom - Namecheap] | |
| modulepath=/usr/syno/bin/ddns/namecheap.php |
The goal is to setup a windows 10 home computer that automatically starts up and runs a user .exe program. No windows logos should be shown and the user should not be able to interact with other windows applications.
Upon shutdown of the .exe the computer should shutdown.
Windows 10 home or pro doesn't allow you to directly set a classic windows app such as a user .exe program as the startup. We instead call a batch script that calls our .exe. instead.
A windows batch script is used to make a .exe run on startup.
How to setup a development environment where Git from WSL integrates with native Windows applications, using the Windows home folder as the WSL home and using Git from WSL for all tools.
Note if using Git for Windows, or any tool on the Windows side that does not use Git from WSL then there will likely be problems with file permissions if using those files from inside WSL.
These are the tools I use:
wslgit)
| #!/bin/bash | |
| # !!WARNING!! | |
| # This will DELETE all efforts you have put into configuring nix | |
| # Have a look through everything that gets deleted / copied over | |
| nix-env -e '.*' | |
| rm -rf $HOME/.nix-* | |
| rm -rf $HOME/.config/nixpkgs |
This gist is out of date and I can no longer help much, as I got rid of my Mac.
Please visit T2 Linux website for more and better information:
This gist is just a compilation of the hard work that others have put in. I'm not a software developer, so if there are any mistakes or better ways of doing things, I'd appreciate any suggestions. Here's a list of the real heroes who made this possible:
| $ # Use Live CD to boot | |
| $ sudo su # Switch to root | |
| $ fdisk -l # Get names of root, boot & EFI partition names. you can also use blkid | |
| $ mount /dev/mapper/fedora_localhost--live-root /mnt # mount root partition | |
| $ cat /mnt/etc/fedora-release | |
| Fedora release 31 (Thirty One) | |
| $ mount /dev/nvme0n1p2 /mnt/boot # mount boot partition | |
| $ mount /dev/nvme0n1p1 /mnt/boot/efi # mount EFI partition | |
| # Note: If you are not able to mount EFI partition ('Input/Output error'), | |
| # You may have to repair ESP file system or format ESP. |