ptpt52

U-Boot 1.1.4-dirty (Oct 12 2017 - 17:31:36)(COMPRESSED)

ap151 - Dragonfly 1.0

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 212k for U-Boot at: 83fc8000
Reserving 132k for malloc() at: 83fa7000
Reserving 44 Bytes for Board Info at: 83fa6fd4
Reserving 36 Bytes for Global Data at: 83fa6fb0

ptpt52

#
# Automatically generated file; DO NOT EDIT.
# OpenWrt Configuration
#
CONFIG_MODULES=y
CONFIG_HAVE_DOT_CONFIG=y
CONFIG_DEFAULT_TARGET_ramips_mt7620nand=y
# CONFIG_TARGET_sunxi is not set
# CONFIG_TARGET_apm821xx is not set
# CONFIG_TARGET_ath25 is not set

ptpt52

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 48be188..7fa135d 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -62,6 +62,12 @@
 			clocks = <&gcc GCC_APPS_CLK_SRC>;
 			clock-frequency = <0>;
 			operating-points-v2 = <&cpu0_opp_table>;
+
+			L2: l2-cache {

ptpt52

[  673.265551] ath10k_pci 0000:01:00.0: failed to send pdev bss chan info request
[  682.385879] ath10k_pci 0000:01:00.0: failed to set beacon mode for vdev 0: -11
[  685.425953] ath10k_pci 0000:01:00.0: failed to set dtim period for vdev 0: -11
[  694.546065] ath10k_pci 0000:01:00.0: failed to recalculate rts/cts prot for vdev 0: -11
[  697.586100] ath10k_pci 0000:01:00.0: failed to set cts protection for vdev 0: -11
[  700.626161] ath10k_pci 0000:01:00.0: failed to set preamble for vdev 0: -11

ptpt52

Press Meta-Z for help on special keys                                                                       
                                                                                                            
?????????~???<27  8  (1~53)27                                                                               
1  (1~54)27  9  (1~55)28                                                                                    
2  (1~53)27  10  (1~57)29                                                                                   
3  (2~58)30  11  (1~55)28                                                    
4  (1~55)28  12  (1~56)28                                                    
5  (1~57)29  13  (1~56)28                                   
6  (1~52)26  14  (1~57)29                                   
7  (2~57)29ࣅ??5                                             

ptpt52

Loading: checksum bad
checksum bad
Got ARP REPLY, set server/gtwy eth addr (00:e0:4c:68:00:7a)
Got it
#################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################

ptpt52

 TIMEOUT_COUNT=10,Load address: 0x80a00000
Loading: checksum bad
Got ARP REPLY, set server/gtwy eth addr (00:e0:4c:68:00:7a)
Got it
#################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################

ptpt52

## Booting image at 80a00000 ...
   Image Name:   MIPS OpenWrt Linux-5.4.24
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    7676357 Bytes =  7.3 MB
   Load Address: 80001000
   Entry Point:  80001000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80001000) ...

ptpt52

Starting kernel ...

[    0.000000] Linux version 5.4.24 (LGA1150@Haswell) (gcc version 9.2.0 (OpenWrt GCC 9.2.0 r12425-d83150e3fb)) #0 SMP Mon Mar 9 17:20:43 2020
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is UBNT-ERX-SFP
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.

ptpt52

===================================================================
                MT7621   stage1 code done 
                CPU=50000000 HZ BUS=16666666 HZ
===================================================================


U-Boot 1.1.3 (UBNT Build Version: e51_001_1e49c) (Jul 27 2018 - 04:44:57)

Board: Ralink APSoC DRAM:  256 MB
relocate_code Pointer at: 8ffac000