Fabien Piuzzi reefab

Setting up netboot.xyz with an EdgeRouter

This document covers how to setup netboot.xyz, a service that provides iPXE-based installation and live boot of a bunch of operating systems, on a Ubiquiti EdgeRouter.

Assumptions

I've made a few assumptions throughout this document that will probably be different for your setup:

Rails 5.2 with webpacker, bootstrap, stimulus starter

This gist will collects all issues we solved with Rails 5.2 and Webpacker

Create Project

# Last few parameters(--skip-* part) is only my habbit not actully required
$ rails new <project_name> --webpack=stimulus --database=postgresql --skip-coffee --skip-test

Intro

This is a simple guide on how to automate UK lights with a Shelly 1 by installing the shelly 1 relay into the ceiling pendant which has both permanent live, neutral and a switched live back from the wall switch.

These steps are from my own experience making my lighting "smart" but also user friendly (it works via a wall switch!). This simple guide will go through replacing an a normal ceiling pendant with one with room for a Shelly 1. If you have a ceiling light with a bigger base it's even easier.

Warning Electrical regulations must be followed by law. If you are not a competent person under the regulations do not attempt electrical work. https://www.diydoctor.org.uk/projects/electrical_safety.htm

Wiring Diagram

This diagram has been taken from here and modified to include the Shelly 1.

Instructions for 4.7.1

https://help.prusa3d.com/guide/how-to-import-profiles-to-cura-4-x-windows-macos_17848

Forum entries

https://forum.prusa3d.com/forum/user-mods-octoprint-enclosures-nozzles/cura-5-0-prusa-mini/

	/**************************************************************************/
	/*!
	@file changeUID.pde
	@author Adafruit Industries
	@license BSD (see license.txt)


	##change the mifare classic 1K UID use back door !!!##

	#!/usr/bin/env bash

	#
	# Enable docker and docker-compose on TrueNAS SCALE (no Kubernetes)
	#
	# This script is a hack! Use it at your own risk!!
	# Using this script to enable Docker is NOT SUPPORTED by ix-systems!
	# You CANNOT use SCALE Apps while using this script!
	#
	# 1 Create a dedicated Docker zvol on one of your zpools: zfs create -V 100G data/_docker

	#include <avr/interrupt.h>
	#include <avr/sleep.h>

	// Arduino IDE settings
	// BOD: 1.8V
	// Clock: 1.2 MHz

	// ATTiny13 pins/legs
	// Leg 8: VCC
	// Leg 4: GND

	#!/usr/bin/env bash

	#
	# Enable docker and docker-compose on TrueNAS SCALE (no Kubernetes)
	#
	# This script is a hack! Use it at your own risk!!
	# Using this script to enable Docker is NOT SUPPORTED by ix-systems!
	# You CANNOT use SCALE Apps while using this script!
	#
	# 1 Create a dedicated Docker dataset in one of your zpools