Skip to content

Instantly share code, notes, and snippets.

View rinex20's full-sized avatar

rinex20

16 followers · 19 following
View GitHub Profile
@rinex20
rinex20 / surge_main.conf
Last active October 30, 2015 01:36
main configure for surge on iOS9
[General]
skip-proxy = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local
bypass-tun = 0.0.0.0/8, 1.0.0.0/9, 1.160.0.0/11, 1.192.0.0/11, 10.0.0.0/8, 14.0.0.0/11, 14.96.0.0/11, 14.128.0.0/11, 14.192.0.0/11, 27.0.0.0/10, 27.96.0.0/11, 27.128.0.0/9, 36.0.0.0/10, 36.96.0.0/11, 36.128.0.0/9, 39.0.0.0/11, 39.64.0.0/10, 39.128.0.0/10, 42.0.0.0/8, 43.224.0.0/11, 45.64.0.0/10, 47.64.0.0/10, 49.0.0.0/9, 49.128.0.0/11, 49.192.0.0/10, 54.192.0.0/11, 58.0.0.0/9, 58.128.0.0/11, 58.192.0.0/10, 59.32.0.0/11, 59.64.0.0/10, 59.128.0.0/9, 60.0.0.0/10, 60.160.0.0/11, 60.192.0.0/10, 61.0.0.0/10, 61.64.0.0/11, 61.128.0.0/10, 61.224.0.0/11, 100.64.0.0/10, 101.0.0.0/9, 101.128.0.0/11, 101.192.0.0/10, 103.0.0.0/10, 103.192.0.0/10, 106.0.0.0/9, 106.224.0.0/11, 110.0.0.0/7, 112.0.0.0/9, 112.128.0.0/11, 112.192.0.0/10, 113.0.0.0/9, 113.128.0.0/11, 113.192.0.0/10, 114.0.0.0/9, 114.128.0.0/11, 114.192.0.0/10, 115.0.0.0/8, 116.0.0.0/8, 117.0.0.0/9, 117.128.0.0/10, 118.0.0.0/11, 118.64.0.0/10, 118.128.0.0/9, 119.0.
@rinex20
rinex20 / surge.conf
Last active October 30, 2015 03:02
[General]
loglevel = notify
skip-proxy = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12,127.0.0.0/24,100.64.0.0/10
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12,127.0.0.0/24,100.64.0.0/10
// DNS OVERRIDE, REMOVE # IF YOU NEED
@rinex20
rinex20 / surge_1101.conf
Created November 2, 2015 02:08
updated #1101
#update:http://www.abclite.cn
#abclite11.1 conf
[General]
skip-proxy = 192.168.0.0/16, 10.0.0.0/8, 172.0.0.0/8, localhost, *.local, e.crashlytics.com, *.jd.com
bypass-tun = 0.0.0.0/8, 1.0.0.0/9, 1.160.0.0/11, 1.192.0.0/11, 10.0.0.0/8, 14.0.0.0/11, 14.96.0.0/11, 14.128.0.0/11, 14.192.0.0/11, 27.0.0.0/10, 27.96.0.0/11, 27.128.0.0/9, 36.0.0.0/10, 36.96.0.0/11, 36.128.0.0/9, 39.0.0.0/11, 39.64.0.0/10, 39.128.0.0/10, 42.0.0.0/8, 43.224.0.0/11, 45.64.0.0/10, 47.64.0.0/10, 49.0.0.0/9, 49.128.0.0/11, 49.192.0.0/10, 54.192.0.0/11, 58.0.0.0/9, 58.128.0.0/11, 58.192.0.0/10, 59.32.0.0/11, 59.64.0.0/10, 59.128.0.0/9, 60.0.0.0/10, 60.160.0.0/11, 60.192.0.0/10, 61.0.0.0/10, 61.64.0.0/11, 61.128.0.0/10, 61.224.0.0/11, 100.64.0.0/10, 101.0.0.0/9, 101.128.0.0/11, 101.192.0.0/10, 103.0.0.0/10, 103.192.0.0/10, 106.0.0.0/9, 106.224.0.0/11, 110.0.0.0/7, 112.0.0.0/9, 112.128.0.0/11, 112.192.0.0/10, 113.0.0.0/9, 113.128.0.0/11, 113.192.0.0/10, 114.0.0.0/9, 114.128.0.0/11, 114.192.0.0/10, 115.0.0.0/8, 116.0.0.0/8, 117.0.0.0/9, 117.
@rinex20
rinex20 / surgemain.conf
Created November 5, 2015 01:46
经常更新的https://gist.github.com/scomper/b0c6129840272c136a82
[General]
# warning, notify, info, verbose
skip-proxy = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, e.crashlytics.com
bypass-tun = 0.0.0.0/8, 1.0.0.0/9, 1.160.0.0/11, 1.192.0.0/11, 10.0.0.0/8, 14.0.0.0/11, 14.96.0.0/11, 14.128.0.0/11, 14.192.0.0/11, 27.0.0.0/10, 27.96.0.0/11, 27.128.0.0/9, 36.0.0.0/10, 36.96.0.0/11, 36.128.0.0/9, 39.0.0.0/11, 39.64.0.0/10, 39.128.0.0/10, 42.0.0.0/8, 43.224.0.0/11, 45.64.0.0/10, 47.64.0.0/10, 49.0.0.0/9, 49.128.0.0/11, 49.192.0.0/10, 54.192.0.0/11, 58.0.0.0/9, 58.128.0.0/11, 58.192.0.0/10, 59.32.0.0/11, 59.64.0.0/10, 59.128.0.0/9, 60.0.0.0/10, 60.160.0.0/11, 60.192.0.0/10, 61.0.0.0/10, 61.64.0.0/11, 61.128.0.0/10, 61.224.0.0/11, 100.64.0.0/10, 101.0.0.0/9, 101.128.0.0/11, 101.192.0.0/10, 103.0.0.0/10, 103.192.0.0/10, 106.0.0.0/9, 106.224.0.0/11, 110.0.0.0/7, 112.0.0.0/9, 112.128.0.0/11, 112.192.0.0/10, 113.0.0.0/9, 113.128.0.0/11, 113.192.0.0/10, 114.0.0.0/9, 114.128.0.0/11, 114.192.0.0/10, 115.0.0.0/8, 116.0.0.0/8, 117.0.0.0/9, 117.128.0.0/10
@rinex20
rinex20 / bricks-surge.conf
Last active November 11, 2015 03:45
BRICK surge
# BRICKS Surge configuration file by @leaskh';
# Get Info: https://github.com/leask/bricks
# Based on: http://surge.run/config-example/ss-module.conf
[General]
loglevel = notify
skip-proxy = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 127.0.0.0/8, 100.64.0.0/10, localhost, *.local, e.crashlytics.com
bypass-tun = 192.168.0.0/16, 0.0.0.0/8, 1.0.0.0/9, 1.160.0.0/11, 1.192.0.0/11, 10.0.0.0/8, 14.0.0.0/11, 14.96.0.0/11, 14.128.0.0/11, 14.192.0.0/11, 27.0.0.0/10, 27.96.0.0/11, 27.128.0.0/9, 36.0.0.0/10, 36.96.0.0/11, 36.128.0.0/9, 39.0.0.0/11, 39.64.0.0/10, 39.128.0.0/10, 42.0.0.0/8, 43.224.0.0/11, 45.64.0.0/10, 47.64.0.0/10, 49.0.0.0/9, 49.128.0.0/11, 49.192.0.0/10, 54.192.0.0/11, 58.0.0.0/9, 58.128.0.0/11, 58.192.0.0/10, 59.32.0.0/11, 59.64.0.0/10, 59.128.0.0/9, 60.0.0.0/10, 60.160.0.0/11, 60.192.0.0/10, 61.0.0.0/10, 61.64.0.0/11, 61.128.0.0/10, 61.224.0.0/11, 100.64.0.0/10, 101.0.0.0/9, 101.128.0.0/11, 101.192.0.0/10, 103.0.0.0/10, 103.192.0.0/10, 106.0.0.0/9, 106.224.0.0/11, 110.0.0.0/7, 112.0.0.0/9, 112.128.0.
@rinex20
rinex20 / usbreset.c
Created February 14, 2016 14:49 — forked from x2q/usbreset.c
usbreset used for 3G dongle
/* usbreset -- send a USB port reset to a USB device
*
* Compile using: gcc -o usbreset usbreset.c
*
*
* */
@rinex20
rinex20 / gist:8026a9d3b6736af50582
Created February 17, 2016 13:49 — forked from anonymous/gist:8b4a0101f5101f756bb9
Get OAUTH2.0 access token for Google Voice with a shell-script
#!/bin/bash
##
## Authenticate with Google Voice
##
USAGE="`basename $0` {auth|refresh|token} ctx"
CTX_DIR=$HOME/.gvauth
CLIENT_ID="YOUR_CLIENTID_FROM_GOOGLE_DEVELOPER_CONSOLE"
CLIENT_SECRET="YOUR_CLIENTSECRET_FROM_GOOGLE_DEVELOPER_CONSOLE"
SCOPE="https://www.googleapis.com/auth/googletalk%20https://www.googleapis.com/auth/userinfo.email%20https://www.googleapis.com/auth/userinfo.profile"
@rinex20
rinex20 / ss-redir 透明代理.md
Created December 30, 2016 08:53 — forked from wen-long/ss-redir 透明代理.md
ss-redir 透明代理.md

##ss-redir 的 iptables 配置(透明代理)

透明代理指对客户端透明，客户端不需要进行任何设置就使用了网管设置的代理规则

创建 /etc/ss-redir.json 本地监听 7777 运行ss-redir -v -c /etc/ss-redir.json

iptables -t nat -N SHADOWSOCKS
# 在 nat 表中创建新链
iptables -t nat -A SHADOWSOCKS -p tcp --dport 23596 -j RETURN
# 23596 是 ss 代理服务器的端口，即远程 shadowsocks 服务器提供服务的端口，如果你有多个 ip 可用,但端口一致，就设置这个
@rinex20
rinex20 / iperf.service
Created April 5, 2022 05:38
[Unit]
Description=iPerf3
After=network.target
[Service]
Type=simple
User=nobody
Restart=on-failure
ExecStart=/usr/bin/iperf3 -s
@rinex20
rinex20 / a-v2ray-client-frp.md
Last active April 27, 2022 08:13
## v2ray config json file for intranet proxy

v2ray config json file for intranet proxy