seco / esp8266-lgwhisen-slack-bot.ino

Created April 5, 2017 05:27 — forked from chaeplin/esp8266-lgwhisen-slack-bot.ino

esp8266-lgwhisen-slack-bot.ino

	// 80MHZ NODEMCU V.1
	// slackbot testing using https://github.com/urish/arduino-slack-bot
	/**
	Arduino Real-Time Slack Bot

	Copyright (C) 2016, Uri Shaked.

	Licensed under the MIT License
	*/

seco / slack_test.ino

Created April 3, 2017 07:46 — forked from NaotoKumagai/slack_test.ino

SlackBOTのコードを少し改変

	// https://github.com/urish/arduino-slack-bot

	#include <Arduino.h>
	#include <Hash.h>
	#include <ESP8266WiFiMulti.h>
	#include <ESP8266HTTPClient.h>
	#include <WebSocketsClient.h>
	#include <ArduinoJson.h>

	#define WIFI_SSID "接続したいSSID"

seco / ESP8266_Xiaomi_Yi_Remote_Controller.ino

Created March 10, 2017 04:30 — forked from emmynet/ESP8266_Xiaomi_Yi_Remote_Controller.ino

Simple test to control Xiaomi Yi camera with a standalone ESP8266 ESP-01 (costs about 2$ on ebay).

	/*
	* This sketch demonstrates how to use ESP8266 to control Xiaomi Yi Camera.
	*
	* @author Emmanuel Granatello
	* @version 0.1
	* @since 2016-02-16
	*/

	#include "ESP8266WiFi.h"

seco / ESP8266 Web Server to storing ap config to EEPROM.md

Created January 3, 2017 08:12 — forked from dogrocker/ESP8266 Web Server to storing ap config to EEPROM.md

ESP8266 Web Server to storing ap config to EEPROM

ESP8266 Web Server to storing ap config to EEPROM.

Original by chriscook8 from esp8266.com I just modified to use ESP8266WebServer library for easy to handle the http request.

This is sample code not yet complete.

Todo

when Wifi connected need to close the softAP.

seco / POVwriter.ino

Created December 31, 2016 01:57 — forked from jamesabruce/POVwriter.ino

	// how long each led stays on for
	int delayTime = 1;
	//how long between each
	int charBreak = 3;
	//how long to wait after the message is finished before it repeats
	int resetTime = 20;

	int LED1 = 2;
	int LED2 = 3;
	int LED3 = 4;

seco / Blynk Web Dashboard

Created December 21, 2016 01:44

Blynk

	Blynk Web Dashboard
	------

	A [Pen](http://codepen.io/shrikantgg/pen/oYgoxm) by [shrikant](http://codepen.io/shrikantgg) on [CodePen](http://codepen.io/).

	[License](http://codepen.io/shrikantgg/pen/oYgoxm/license).

seco / i2s_stream.c

Created December 14, 2016 12:19 — forked from cnlohr/i2s_stream.c

ESP32 I2S C Code Example/Snippet

	//Almost entirelly lifted directly from https://github.com/igrr/esp32-cam-demo
	//Just clocked a little differently and has chained buffers.
	//This totes works with the I2S bus on the ESP32 for READING 16 wires simultaneously.
	//Can be clocked off of I2S's internal controller or an external clock.

	#define I2S_D0 4
	#define I2S_D1 5
	#define I2S_D2 18
	#define I2S_D3 19
	#define I2S_D4 36

seco / esp32.md

Created November 17, 2016 02:38 — forked from morganrallen/esp32.md

ESP32 hacking notes

Basic hookup

As I plan to make a custom breakout board I wanted to solder as few connections as possible. I was able to boot the device, with UART (out at least) soldering the following.

PIN	NAME
0	GND
1	3V3
2	EN

seco / Energy_Monitor.ino

Created November 1, 2016 00:44 — forked from whatnick/Energy_Monitor.ino

ESP8266 Energy Monitor

	/*
	* This sketch sends ads1115 current sensor data via HTTP POST request to thingspeak server.
	* It needs the following libraries to work (besides the esp8266 standard libraries supplied with the IDE):
	*
	* - https://github.com/adafruit/Adafruit_ADS1X15
	*
	* designed to run directly on esp8266-01 module, to where it can be uploaded using this marvelous piece of software:
	*
	* https://github.com/esp8266/Arduino
	*

seco / add-option-to-dropdown.js

Created September 27, 2016 03:20 — forked from paulund/add-option-to-dropdown.js

Add and Remove Options in Select using jQuery