sh4un

sh4un / ButtonMonitor.py

Created May 28, 2018 23:52 — forked from Everlanders/ButtonMonitor.py

Python Script to monitor GPIO button presses and call the Camera and Backlight.

sh4un / backlight.sh

Created May 28, 2018 23:51 — forked from Everlanders/backlight.sh

Script to Change the Backlight brightness on the Official Raspberry Pi 7" display.

	#!/bin/bash

	level=$1
	#echo "level given is $level"

	if [ $# != 1 ]; then
	echo "USAGE: $0 brightness_level (0 to 255)"
	exit 1
	fi

sh4un / LightMonitor.py

Created May 28, 2018 23:50 — forked from Everlanders/LightMonitor.py

Headlight and Reverse Lights monitor for YouTube Commenters - UNTESTED but should work fine.

	#!/usr/bin/python
	# A quick hack of my button monitor script to monitor headlights and reverse lights to
	# Dim the screen and switch to the reverse camera.
	# I have not tested this...
	# Remember, the switch or opto is switching to ground, so the logic is inverted... 0 = on 1 = off
	# Also, you would run only one of these "Monitor" scripts. you can't be running RearviewMonitor.py AND LightMonitor.py

	import RPi.GPIO as GPIO
	import time
	import subprocess, os