| ################################################################# | |
| # # | |
| # YAML Anchors for Room Cards # | |
| # # | |
| ################################################################# | |
| --- | |
| # The following custom cards must be installed in HACS: | |
| # - text-element | |
| # - stack-in-card (or vertical-stack-in-card) |
| #! /usr/local/bin/python3 | |
| # WARNING: USE AT YOUR OWN RISK, NOT RESPONSIBLE FOR BOTCHED HOME ASSISTANT CONFIGURATIONS | |
| # Change the two lines below and run with `python3 device_tracker_purge.py` | |
| PATH = "/config/.storage/core.entity_registry" | |
| PURGE_PATTERN = "^device_tracker\." | |
| import json | |
| import logging |
| /* open up chrome dev tools (Menu > More tools > Developer tools) | |
| * go to network tab, refresh the page, wait for images to load (on some sites you may have to scroll down to the images for them to start loading) | |
| * right click/ctrl click on any entry in the network log, select Copy > Copy All as HAR | |
| * open up JS console and enter: var har = [paste] | |
| * (pasting could take a while if there's a lot of requests) | |
| * paste the following JS code into the console | |
| * copy the output, paste into a text file | |
| * open up a terminal in same directory as text file, then: wget -i [that file] | |
| */ |
| #!/usr/bin/env python3 | |
| import requests | |
| from urllib.parse import urljoin | |
| username = "REDACTED" | |
| password = r"REDACTED" | |
| cloud_key_ip = "192.168.1.2" | |
| controller_port = 8443 | |
| site_name = "default" |
| [{"id":"cf4c09c8.62a618","type":"subflow","name":"Proximity Direction","info":"","category":"","in":[{"x":100,"y":120,"wires":[{"id":"f3d3f8e3.baa6d8"}]}],"out":[{"x":900,"y":100,"wires":[{"id":"39d50f9b.dce93","port":0},{"id":"f3d3f8e3.baa6d8","port":1}]},{"x":900,"y":140,"wires":[{"id":"a83c7954.ef7ff8","port":0},{"id":"f3d3f8e3.baa6d8","port":2}]}],"env":[],"color":"#DDAA99","status":{"x":900,"y":200,"wires":[{"id":"811548e6.c2d138","port":0}]}},{"id":"fb59e76e.78b738","type":"switch","z":"cf4c09c8.62a618","name":"To/From","property":"payload","propertyType":"msg","rules":[{"t":"lte","v":"data.event.old_state.state","vt":"msg"},{"t":"gt","v":"data.event.old_state.state","vt":"msg"}],"checkall":"true","repair":false,"outputs":2,"x":380,"y":120,"wires":[["f1af8369.45e2d","47cc6705.3dbdb8"],["5df4fd11.b2f164","fe55edd.ac4731"]]},{"id":"f1af8369.45e2d","type":"counter","z":"cf4c09c8.62a618","name":"","init":"0","step":"1","lower":"","upper":"2","mode":"increment","outputs":"1","x":660,"y":100,"wires":[["39d50f |
/dev/zwave (add to /etc/udev/rules.d/)See the original instructions here: https://community.home-assistant.io/t/rpi-as-z-wave-zigbee-over-ip-server-for-hass/23006 also see the notes below in each file.
Source : Pg 35 ISY SDK Documentation
0 - Idle
1 - Heating
2 - Cooling
3 - Fan Only