| # OSX for Pentesting (Mavericks/Yosemite) | |
| # | |
| # A fork of OSX for Hackers (Original Source: https://gist.github.com/brandonb927/3195465) | |
| #!/bin/sh | |
| # Ask for the administrator password upfront | |
| echo "Have you read through the script prior to running this? (y or n)" | |
| read bcareful |
| = Arch Linux step-by-step installation = | |
| = http://blog.fabio.mancinelli.me/2012/12/28/Arch_Linux_on_BTRFS.html = | |
| == Boot the installation CD == | |
| == Create partition == | |
| cfdisk /dev/sda | |
| * Create a partition with code 8300 (Linux) |
GNOME's tracker is a CPU and privacy hog. There's a pretty good case as to why it's neither useful nor necessary here: http://lduros.net/posts/tracker-sucks-thanks-tracker/
After discovering it chowing 2 cores, I decided to go about disabling it.
Directories
Picking the right architecture = Picking the right battles + Managing trade-offs
| #!/bin/sh | |
| set -ex | |
| PATH=/bin:/sbin:/usr/bin:/usr/sbin | |
| KEYMAP="us us" | |
| HOST=alpine | |
| USER=anon | |
| ROOT_FS=ext4 | |
| BOOT_FS=ext4 |
| # Install Arch Linux with full encrypted btrfs subvolume inside luks | |
| # Hardware: BIOS system, Intel GPU, Nvidia Optimus, Toshiba SSD, Wifi | |
| # Please adjust for your needs. | |
| # filename: install-arch-linux-on-btrfs-subvolume-inside-luks.txt | |
| # The official guide: https://wiki.archlinux.org/index.php/Installation_Guide | |
| # Download the archiso image from https://www.archlinux.org/download/ | |
| # Copy to a usb-drive | |
| dd bs=4M if=archlinux.iso of=/dev/sdx status=progress oflag=sync # on linux |
This documents guides you through the process to install Debian Stretch with Full Disk Encryption. The following requirements exist:
After following this guide, you will end up with a setup like this:
| # Client Bridged / Client Mode / RelayD and IGMPProxy (It works) | |
| # RelayD is to redirect packages and IGMP is for redirect IGMP packages | |
| # Our network is 192.168.1.0/24 | |
| # Steps: | |
| # Configure WAN as static | |
| # We should edit our wan iface and put static IP | |
| uci set network.wan='interface' | |
| uci set network.wan.proto='static' | |
| uci set network.wan.ipaddr='192.168.1.239' # Main Network IP |
| # ==================================================================================== | |
| # Steps for Main Router (must have connected internet on WAN port) | |
| # ==================================================================================== | |
| # Set your network IP address configuration default is 192.168.1.0/24 | |
| uci set network.lan.ipaddr='192.168.1.1' | |
| # Recommended, to identify on network and when logged on | |
| uci set system.@system[0].hostname='MainRouter' | |
| uci set network.lan.hostname="`uci get system.@system[0].hostname`" |
| # ======================================================== | |
| # Setup a Dumb AP, Wired backbone for OpenWRT / LEDE | |
| # ======================================================== | |
| # Set lan logical interface as bridge (to allow bridge multiple physical interfaces) | |
| uci set network.lan.type='bridge' | |
| # assign WAN physical interface to LAN (will be available as an additional LAN port now) | |
| uci set network.lan.ifname="$(uci get network.lan.ifname) $(uci get network.wan.ifname)" | |
| uci del network.wan.ifname | |
| # Remove wan logical interface, since we will not need it. | |
| uci del network.wan |
