simias

% Initializing PSXSDK... 
% malloc setup.
%  372: a5362c93
%  373: 3400deed
%  374: 3400aabc
%  375: 3400cafe
% Pass.

simias

RetroArch [INFO] :: Environ GET_VARIABLE rustation_internal_upscale_factor:
RetroArch [INFO] ::     2
RetroArch [INFO] :: Environ SET_SYSTEM_AV_INFO.
RetroArch [libretro DEBUG] :: OpenGL context destroy
RetroArch [INFO] :: [X11]: Xinerama version: 1.1.
RetroArch [INFO] :: [X11]: Xinerama screens: 1.
RetroArch [INFO] :: [X11]: Saved monitor #0.
RetroArch [INFO] :: Does not have enough samples for monitor refresh rate estimation. Requires to run for at least 4096 frames.
RetroArch [INFO] :: Set audio input rate to: 44240.07 Hz.
RetroArch [INFO] :: Found shader "/home/simias/.config/retroarch/shaders/retroarch.cgp"

simias

RetroArch [INFO] :: Loading content file: /home/simias/sync/roms/gb/Picross 2 (Japan) (SGB Enhanced).gb.
retro_read_file: Failed to open /home/simias/sync/roms/gb/Picross 2 (Japan) (SGB Enhanced).ips: No such file or directory
retro_read_file: Failed to open /home/simias/sync/roms/gb/Picross 2 (Japan) (SGB Enhanced).bps: No such file or directory
retro_read_file: Failed to open /home/simias/sync/roms/gb/Picross 2 (Japan) (SGB Enhanced).ups: No such file or directory
RetroArch [INFO] :: Did not find a valid content patch.
retro_read_file: Failed to open {: No such file or directory
RetroArch [INFO] :: Loading state: "{".
RetroArch [ERROR] :: Failed to load state from "{".
RetroArch [INFO] :: CRC32: 0xf5aa5902 .
RetroArch [INFO] :: Skipping SRAM load..

simias

RetroArch [INFO] :: Config: loading config from: /home/simias/.config/retroarch/retroarch.cfg.
RetroArch [INFO] :: Environ SET_PIXEL_FORMAT: RGB565.
RetroArch [INFO] :: Version of libretro API: 1
RetroArch [INFO] :: Compiled against API: 1
RetroArch [INFO] :: Threaded rarch_task started
RetroArch [INFO] :: Set audio input rate to: 29999.99 Hz.
RetroArch [INFO] :: Found shader "/home/simias/.config/retroarch/shaders/retroarch.cgp"
RetroArch [INFO] :: Video @ 320x240
RetroArch [INFO] :: Found GL context: glx
RetroArch [INFO] :: Detecting screen resolution 1200x1920.

simias

#version 330 core

uniform sampler2D fb_texture;

// Scaling to apply to the dither pattern
uniform uint dither_scaling;

in vec3 frag_shading_color;
// Texture page: base offset for texture lookup.
flat in uvec2 frag_texture_page;

simias

Target framebuffer size: 2048x1920
RetroArch [INFO] :: Environ SET_GEOMETRY.
RetroArch [INFO] :: SET_GEOMETRY: 2048x1920, aspect: 1.333.
DrawBuffer::bind() - BINDING BUFFER ID 50 AS A GL_ARRAY_BUFFER
DrawBuffer::bind() - BINDING BUFFER ID 50 AS A GL_ARRAY_BUFFER
DrawBuffer::draw() - BUFFER ID 50
DrawBuffer::draw() - BINDING VAO ID 4
DrawBuffer::draw() - BINDING PROGRAM ID 15
DrawBuffer::bind() - BINDING BUFFER ID 49 AS A GL_ARRAY_BUFFER
DrawBuffer::bind() - BINDING BUFFER ID 49 AS A GL_ARRAY_BUFFER

simias

** Timing model

Those are all very approximate timings, they can vary by a significant
amount between calls.

| Step                                     | Duration (CPU cycles) |
|------------------------------------------+-----------------------|
| Command register write -> param transfer |    [9400; 1540][fn:1] |
| Param transfer (if any)                  |              1800 * n |
| Command execution                        |                  2000 |

simias

==12422== Use of uninitialised value of size 8
==12422==    at 0x9408653: tolower (in /lib/x86_64-linux-gnu/libc-2.22.so)
==12422==    by 0x4C2D90D: strcasecmp (vg_replace_strmem.c:687)
==12422==    by 0x420A32: string_list_find_elem_prefix (string_list.c:270)
==12422==    by 0x41F587: parse_dir_entry (dir_list.c:113)
==12422==    by 0x420A32: string_list_find_elem_prefix (string_list.c:270)
==12422==    by 0x41F587: parse_dir_entry (dir_list.c:113)
==12422==    by 0x41F587: dir_list_new (dir_list.c:193)
==12422==    by 0x420D44: dir_list_new_special (list_special.c:112)
==12422==    by 0x418C52: shader_dir_init (runloop.c:292)

simias

RetroArch [INFO] :: [Shader driver]: Using Cg shader backend.
RetroArch [ERROR] :: Invalid profile type
RetroArch [INFO] :: CG: Destroying programs.
RetroArch [ERROR] :: [GL]: Failed to initialize shader, falling back to stock.
RetroArch [INFO] :: [Shader driver]: Using Cg shader backend.
RetroArch [ERROR] :: Invalid profile type
RetroArch [INFO] :: CG: Destroying programs.
RetroArch [ERROR] :: [GL]: Shader initialization failed.
RetroArch [ERROR] :: Cannot open video driver ... Exiting ...
RetroArch [ERROR] :: Fatal error received in: "init_video()"

simias

Those are all very approximate timings, they can vary by a significant
amount between calls.

| Step                                     | Duration (CPU cycles) |
|------------------------------------------+-----------------------|
| Command register write -> param transfer |   [9400; 15400][fn:1] |
| Param transfer (if any)                  |              1800 * n |
| Command execution                        |                  2000 |
| RX FIFO clear                            |                  2000 |
| Push response                            |        1500 * n[fn:2] |