smukkejohan

#include "Arduino.h"
// Written by Johan Bichel Lindegaard <[email protected]>

int aPin = 19;
int bPin = 20;

long lastPosition = 0;
long position  = 0;

// values based on calibration with min max A: 8 26 B: 8 31

smukkejohan

import Redis from "ioredis";
import EventBus from 'js-event-bus';
//import { persistBus } from './routes/admin/_persist-bus';
let bus = EventBus();

const redisConfig = {
    segment: 'nyhedshjul'
}
if(process.env.REDIS_SENTINELS && process.env.REDIS_SENTINELS.indexOf(';') > 0){ 
    // a string stariting with the name of the group, a semicolon, followed by sentinels in the format host:port, seperated by commas:

smukkejohan

#include <Arduino.h>
//**** Using a Teensy 3.5 to Connect an ESP8266 to USB Serial  for use and testing with AT commands *******

#define SSID "insert_SSID"  //name of wireless access point to connect to
#define PASS "insert_PASSWORD"  //wifi password

#define RST_PIN 24 // Pull low to trigger reset
#define CH_PD_PIN 25 // Pull high for AT command mode, low for firmware flash mode 
#define TX_LED_PIN 14 // YELLOW LED - SENDING
#define RX_LED_PIN 15 // RED LED - RECEIVING

smukkejohan

//**** Using a Teensy 3.5 to host a webserver on a wifi network using ESP8266 *******

#include <Arduino.h>

#define SSID "insert_SSID"  //name of wireless access point to connect to
#define PASS "insert_password"  //wifi password

#define RST_PIN 24 // Pull low to trigger reset
#define CH_PD_PIN 25 // Pull high for AT command mode, low for firmware flash mode 
#define LED_PIN 14 // YELLOW LED - SENDING

smukkejohan

#include <Arduino.h>

// Se https://learn.adafruit.com/make-it-switch/debouncing for nærmere beskrivelse

int ledPin = 3;
int buttonPin = 6;

unsigned long debounceTime = 5;
unsigned long lastDebounceTimestamp = 0;

smukkejohan

#include <Arduino.h>

// Se https://learn.adafruit.com/make-it-switch/debouncing for nærmere beskrivelse

int ledPin = 3;
int buttonPin = 6;

unsigned long debounceTime = 5;
unsigned long lastDebounceTimestamp = 0;

smukkejohan

#include <Arduino.h>
//#define FASTLED_RGBW
//#include <FastLED.h>

#include <Adafruit_NeoPixel.h>
// Which pin on the Arduino is connected to the NeoPixels?
// On a Trinket or Gemma we suggest changing this to 1:
#define LED_PIN     6

// How many NeoPixels are attached to the Arduino?

smukkejohan

#include <Arduino.h>

int buttonPin = 2; 
int ledPin = 13;

int buttonState = HIGH;
int lastButtonState = LOW; 

int ledState = LOW;
bool blinkFast = true;

smukkejohan

Started by user Johan Bichel Lindegaard 
Building in workspace /var/lib/jenkins/workspace/Give Me A Break - Staging
 > git rev-parse --is-inside-work-tree # timeout=10
Fetching changes from the remote Git repository
 > git config remote.origin.url [email protected]:dr-udsendelse/give-me-a-break.git # timeout=10
Fetching upstream changes from [email protected]:dr-udsendelse/give-me-a-break.git
 > git --version # timeout=10
using GIT_SSH to set credentials 
 > git fetch --tags --progress [email protected]:dr-udsendelse/give-me-a-break.git +refs/heads/*:refs/remotes/origin/*
 > git rev-parse refs/remotes/origin/staging^{commit} # timeout=10

smukkejohan

{
  "info": {
      "identifier": "0000000000000",
      "txDate": "2019-01-22T09:18:53",
      "user": "drexjbil"
  },
  "buildSettings": {
      "mainTemplate": "IPP",
      "project": "DR2",
      "projectPath": "../../AEAirlook/DR2_Nov17",