phpcodertop

#!/bin/bash



echo "Downloading ipvtl Software \n"

cd /home

wget http://www.ipvideotrans.com/download/ipvtl_trial-x64.tar.xz

uablacklist

:local apiPrefix "https://uablacklist.net/subnets_mikrotik_"
:local tempFile "uablacklist.txt"
:local listName "uablacklist"

/log info "removing existing '$listName'..."
:put "removing existing '$listName'..."
/ip firewall address-list remove [/ip firewall address-list find list=$listName]

# mikrotik can't load >4KB file inside a variable, so backend contains file pieces which we download and parse one by one
:local i 0

chrisstubbs93

#!/bin/sh

sleep 5
ffmpeg -re -f mjpeg -r 10 -i "http://localhost/?action=stream" -ar 44100 -ac 2 -acodec pcm_s16le -f s16le -ac 2 -i /dev/zero -acodec aac -ab 1k -strict experimental -s 640x360 -vcodec h264 -pix_fmt yuv420p -g 20 -vb 500k -preset ultrafast -crf 31 -r 10 -f flv "rtmp://a.rtmp.youtube.com/live2/xxxx-xxxx-xxxx-xxxx" 2> /home/pi/ffmpeg.log

arjunv

{
    "key_events": {
        "key_unknown": "adb shell input keyevent 0",
        "key_soft_left": "adb shell input keyevent 1",
        "key_soft_right": "adb shell input keyevent 2",
        "key_home": "adb shell input keyevent 3",
        "key_back": "adb shell input keyevent 4",
        "key_call": "adb shell input keyevent 5",
        "key_endcall": "adb shell input keyevent 6",
        "key_0": "adb shell input keyevent 7",

chriswayg

Cloud images in Proxmox

• Preparing Cloud-Init Templates
• Cloud-Init Support - Proxmox VE
• Proxmox VE Administration Guide

A script which automates these steps for multiple distros incl. CoreOS, CentOS, Arch and ALpine

• create-cloud-template.sh

Steps for creating an Ubuntu 18.04 cloud template

• Using a ready-to-use Ubuntu image

chriswayg

#!/bin/bash
set -o errexit

clear
printf "\n*** This script will download a cloud image and create a Proxmox VM template from it. ***\n\n"

### HOW TO USE
### Pre-req:
### - run on a Proxmox 6 server
### - a dhcp server should be active on vmbr1

mrpeardotnet

HP Smart Storage Admin CLI (ssacli) installation and usage on Proxmox PVE (6.x)

Why use HP Smart Storage Admin CLI?

You can use ssacli (smart storage administrator command line interface) tool to manage any of supported HP Smart Array Controllers in your Proxmox host without need to reboot your server to access Smart Storage Administrator in BIOS. That means no host downtime when managing your storage.

CLI is not as convenient as GUI interface provided by BIOS or desktop utilities, but still allows you to fully manage your controller, physical disks and logical drives on the fly with no Proxmox host downtime.

ssacli replaces older hpssacli, but shares the same syntax and adds support for newer servers and controllers.

Installation

l0ser140

#Schedule run every ~30sec.

:global botID;
:global myChatID;

:local parse do={
  :local startLoc ([:find $content $variable -1] + [:len $variable] + 2);
  :local commaLoc ([:find $content "," $startLoc] - 1 + 1);
  :local braceLoc ([:find $content "}" $startLoc] - 1 + 1);
  :local endLoc $commaLoc;

si458

HP Smart Storage Admin CLI (ssacli) installation and usage on Proxmox PVE (8.x)

Why use HP Smart Storage Admin CLI?

You can use ssacli (smart storage administrator command line interface) tool to manage any of supported HP Smart Array Controllers in your Proxmox host without need to reboot your server to access Smart Storage Administrator in BIOS. That means no host downtime when managing your storage.

CLI is not as convenient as GUI interface provided by BIOS or desktop utilities, but still allows you to fully manage your controller, physical disks and logical drives on the fly with no Proxmox host downtime.

ssacli replaces older hpssacli, but shares the same syntax and adds support for newer servers and controllers.

Installation

4abhinavjain

# should works on any cloud-init enabled hypervisor (openstack.. )

# start from a normal ubuntu 20.04 install as minimal was not available for ARM64
# Since ARM64 machines has higher RAM, Shrinking is desired but not necessary. Instead we will increase tmpfs to 1700MB

# Getting root (if sudo -i doesn't work then set a root password beforehand using 'sudo passwd root'

sudo -i

# make sure we are on the highest kernel, so we can delete all the others ...