mathieue

socat - udp4-listen:8125,fork | tee >(socat - udp-sendto:127.0.0.1:8135) >(socat - udp-sendto:127.0.0.1:8140)

Nokius

ARCH LINUX WITH MAINLINE KERNEL FOR TOSHIBA AC100

all u need

• 1-2 hours of your life
• build envirment for the Kernel
• device with Ubuntu and nvflash
• AC100
• mini-usb cabel
• usb-stick >512MB

EndingCredits

Install mopidy: ##N.B: You might need to do this as per instructions on `https://docs.mopidy.com/en/latest/installation/debian/`
`sudo apt-get update && sudo apt-get install mopidy` 

Set the mopidy to run automatically via `sudo systemctl enable mopidy`

Now we need to set up configuration files.

Since we're going to be running mopidy as a service, we need to edit `/etc/mopidy/mopidy.conf`(see https://docs.mopidy.com/en/latest/service/#service)

Add the following to to configuration file:

meanevo

# Make sure you have these installed
yum install -y make gcc perl pcre-devel zlib-devel
# Download/Extract source
wget -O /tmp/haproxy.tgz http://www.haproxy.org/download/1.7/src/haproxy-1.7.2.tar.gz
tar -zxvf /tmp/haproxy.tgz -C /tmp
cd /tmp/haproxy-*
# Compile HAProxy
# https://github.com/haproxy/haproxy/blob/master/README
make \
    TARGET=linux2628 USE_LINUX_TPROXY=1 USE_ZLIB=1 USE_REGPARM=1 USE_PCRE=1 USE_PCRE_JIT=1 \

jarek-przygodzki

sudo useradd --system --shell /bin/false node_exporter

curl -fsSL https://github.com/prometheus/node_exporter/releases/download/v1.3.1/node_exporter-1.3.1.linux-amd64.tar.gz \
  | sudo tar -zxvf - -C /usr/local/bin --strip-components=1 node_exporter-1.3.1.linux-amd64/node_exporter \
  && sudo chown node_exporter:node_exporter /usr/local/bin/node_exporter

amcolash

This gist is a list of instructions that I used to program my ATTiny85s with Micronucleus. They worked for me, but your mileage may vary! I would highly recommend starting by looking at the SparkFun article linked at the bottom for schematics and more in-depth info. This gist is mostly just a copy/paste list.

## Required:
- ATTiny85
- AVR programmer
- 1 uF capacitor
- Micronucleus FW: https://github.com/micronucleus/micronucleus/releases
- avrdude: http://www.nongnu.org/avrdude/

## Setup:

miguelmota

echo 'hello world' > /dev/udp/0.0.0.0/3000

luk6xff

You might want to read this to get an introduction to armel vs armhf.

If the below is too much, you can try Ubuntu-ARMv7-Qemu but note it contains non-free blobs.

Running ARM programs under linux (without starting QEMU VM!)

First, cross-compile user programs with GCC-ARM toolchain. Then install qemu-arm-static so that you can run ARM executables directly on linux

If there's no qemu-arm-static in the package list, install qemu-user-static instead

cr3ative

Making a half-convincing USB Mouse Jiggler on the cheap

I object to USB Mouse Jigglers being £20-£30 on Amazon for something a microcontroller should be able to do with ease, in an unconfigurable/unknown state when it comes to how they describe themselves to the host machine.

We can do better, with a reprogrammable version for about £6.

There are existing guides to each part of this, and I've linked them inline. Here's a great one for people less familiar with Arduino, but this guide assumes basic knowledge of Arduino.

Hardware

hunterjm

blueprint:
  name: Frigate Notification (0.10.0)
  description: |
    ## Frigate Mobile App Notification

    This blueprint will send a notification to your device when a Frigate event for the selected camera is fired. The notification will initially include the thumbnail of the detection, but include an actionable notification allowing you to view the clip and snapshot.

    With this blueprint, you may send the notification to multiple devices by leaving "Device" blank and instead use a [notification group][1].

    ### Software Version Requirements