system1357

/* Melbus CDCHGR Emulator
 * Program that emulates the MELBUS communication from a CD-changer (CD-CHGR) in a Volvo V70 (HU-xxxx) to enable AUX-input through the 8-pin DIN-contact. 
 * This setup is using an Arduino Nano 5v clone
 * 
 * The HU enables the CD-CHGR in its source-menue after a successful initialization procedure is accomplished. 
 * The HU will remove the CD-CHGR everytime the car starts if it wont get an response from CD-CHGR (second init-procedure).
 * 
 * Karl Hagström 2015-11-04
 * mod by S. Zeller 2016-03-14
 * 

system1357

1.0.153.46
1.0.159.34
1.1.129.181
1.1.130.107
1.1.135.147
1.1.135.98
1.1.152.98
1.1.161.193
1.1.162.33
1.1.163.102

system1357

diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
index 14ce8e7833d6..22d7fae2bf87 100644
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -41,6 +41,12 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
 	cirrus-wm5102.dtbo \
 	cm-swap-i2c0.dtbo \
 	cma.dtbo \
+	devterm-bt.dtbo \
+	devterm-misc.dtbo \

system1357

from typing import Optional

from mitmproxy import contentviews, flow, http, ctx

from base64 import b64decode, b64encode
import hashlib
import json

ssecurity = None

system1357

#include <stdint.h>
#include <stdio.h>
#include <time.h>
#include <stdlib.h>

uint16_t blocks[3];

void main(){
        // Check time
        time_t now;