Siraj 'Sid' Rakhada tidalvirus

Keybase proof

I hereby claim:

I am tidalvirus on github.
I am virtuasid (https://keybase.io/virtuasid) on keybase.
I have a public key ASB6c1G96oXimapiHldAqj_DqtS5GgWvGticxemk7dMzsQo

To claim this, I am signing this object:

WIP - Still tuning (2022-04-18)

Configuring and Compiling Marlin for the Bigtreetech SKR Mini E3 V3 board in a Sovol SV03

All items in the Sovol are stock, except the filament sensor is going to be replaced with a Bigtreetech Smart Filament Sensor.

Initially will just match the Sovol stock config, and will then enable things like UBL, and linear advance - and this will be updated as I experiment with these. There might be minor changes for things that do not seem critical - e.g. PREHEAT levels. I also enabled some smaller things that didn't seem to fundamentally alter things - except BLTouch levelling - I modified that from defaults, because it was INSANELY slow - I previously used TH3Ds firmware, and the 5x5 probing with that was probably twice as fast or more than what the default was on stock Marlin.

I'm also disappointed. I misread that this board had dual Z axis. But it's actually no different from the stock Sovol setup - it uses one driver for both Z motors. The old board actually had another st

	<VirtualHost *:80>
	ServerAdmin webmaster@localhost

	ErrorLog "\|/usr/bin/cronolog -l /var/www/default/log/error.log /var/www/default/log/error/error.%Y.%m.log"
	CustomLog "\|/usr/bin/cronolog -l /var/www/default/log/access.log /var/www/default/log/access/access.%Y.%m.log" combined
	# Possible values include: debug, info, notice, warn, error, crit,
	# alert, emerg.
	LogLevel warn

	DocumentRoot /var/www/default/html

	<IfModule mod_ssl.c>
	NameVirtualHost *:443
	<VirtualHost *:443>
	ServerName default.mindless.co.uk <- might or might not need this line
	SSLEngine On
	SSLCertificateFile /etc/ssl/certs/wildcard.mindless.co.uk.cert
	SSLCertificateKeyFile /etc/ssl/private/wildcard.mindless.co.uk.key
	ServerAdmin webmaster@localhost
	ErrorLog "\|/usr/bin/cronolog -l /var/www/default-ssl/log/error.log /var/www/default-ssl/log/error/error.%Y.%m.log"
	CustomLog "\|/usr/bin/cronolog -l /var/www/default-ssl/log/access.log /var/www/default-ssl/log/access/access.%Y.%m.log" combined


	// Diagnostic test for the displayed colour order
	//
	// Written by Bodmer 17/2/19 for the TFT_eSPI library:
	// https://github.com/Bodmer/TFT_eSPI

	/*
	Different hardware manufacturers use different colour order
	configurations at the hardware level. This may result in
	incorrect colours being displayed.