tpope

inoremap <silent> <Bar>   <Bar><Esc>:call <SID>align()<CR>a

function! s:align()
  let p = '^\s*|\s.*\s|\s*$'
  if exists(':Tabularize') && getline('.') =~# '^\s*|' && (getline(line('.')-1) =~# p || getline(line('.')+1) =~# p)
    let column = strlen(substitute(getline('.')[0:col('.')],'[^|]','','g'))
    let position = strlen(matchstr(getline('.')[0:col('.')],'.*|\s*\zs.*'))
    Tabularize/|/l1
    normal! 0
    call search(repeat('[^|]*|',column).'\s\{-\}'.repeat('.',position),'ce',line('.'))

jonah-williams

#!/bin/bash

# https://gist.github.com/949831
# http://blog.carbonfive.com/2011/05/04/automated-ad-hoc-builds-using-xcode-4/

# command line OTA distribution references and examples
# http://nachbaur.com/blog/how-to-automate-your-iphone-app-builds-with-hudson
# http://nachbaur.com/blog/building-ios-apps-for-over-the-air-adhoc-distribution
# http://blog.octo.com/en/automating-over-the-air-deployment-for-iphone/
# http://www.neat.io/posts/2010/10/27/automated-ota-ios-app-distribution.html

MaienM

inoremap <silent> = =<Esc>:call <SID>ealign()<CR>a
function! s:ealign()
  let p = '^.*=\s.*$'
  if exists(':Tabularize') && getline('.') =~# '^.*=' && (getline(line('.')-1) =~# p || getline(line('.')+1) =~# p)
    let column = strlen(substitute(getline('.')[0:col('.')],'[^=]','','g'))
    let position = strlen(matchstr(getline('.')[0:col('.')],'.*=\s*\zs.*'))
    Tabularize/=/l1
    normal! 0
    call search(repeat('[^=]*=',column).'\s\{-\}'.repeat('.',position),'ce',line('.'))
  endif

CristinaSolana

1. Clone your fork:

git clone [email protected]:YOUR-USERNAME/YOUR-FORKED-REPO.git

2. Add remote from original repository in your forked repository:

cd into/cloned/fork-repo
git remote add upstream git://github.com/ORIGINAL-DEV-USERNAME/REPO-YOU-FORKED-FROM.git
git fetch upstream

jboner

Latency Comparison Numbers (~2012)
----------------------------------
L1 cache reference                           0.5 ns
Branch mispredict                            5   ns
L2 cache reference                           7   ns                      14x L1 cache
Mutex lock/unlock                           25   ns
Main memory reference                      100   ns                      20x L2 cache, 200x L1 cache
Compress 1K bytes with Zippy             3,000   ns        3 us
Send 1K bytes over 1 Gbps network       10,000   ns       10 us
Read 4K randomly from SSD*             150,000   ns      150 us          ~1GB/sec SSD

unak

* Only the releases of the stable versions are listed in principle.  The releases of the unstable versions especially considered to be important are indicated as "not stable."
* The branches used as the source of each releases are specified, and the branching timing of them are also shown.  BTW, before subversionizing of the repository, the term called "trunk" was not used, but this list uses it in order to avoid confusion.
* In order to show a historical backdrop, big conferences (RubyKaigi, RubyConf and Euruko) are also listed.  About the venues of such conferences, general English notations are adopted, in my hope.
* ruby_1_8_7 branch was recut from v1_8_7 tag after the 1.8.7 release because of an accident.
* 1.2.1 release was canceled once, and the 2nd release called "repack" was performed.  Although there were other examples similar to this, since the re-releases were performed during the same day, it does not write clearly in particular.
* Since 1.0 was released with the date in large quantities, the mi

sekati

# xcode-build-bump.sh
# @desc Auto-increment the build number every time the project is run. 
# @usage
# 1. Select: your Target in Xcode
# 2. Select: Build Phases Tab
# 3. Select: Add Build Phase -> Add Run Script
# 4. Paste code below in to new "Run Script" section
# 5. Drag the "Run Script" below "Link Binaries With Libraries"
# 6. Insure that your starting build number is set to a whole integer and not a float (e.g. 1, not 1.0)

sgergely

----- Esc -----
Quick change directory: Esc + c
Quick change directory history: Esc + c and then Esc + h
Quick change directory previous entry: Esc + c and then Esc + p
Command line history: Esc + h
Command line previous command: Esc + p
View change: Esc + t (each time you do this shortcut a new directory view will appear)
Print current working directory in command line: Esc + a
Switch between background command line and MC: Ctrl + o
Search/Go to directory in active panel: Esc + s / Ctrl + s then start typing directory name

tagrudev

# Do not refactor, it is a bad practice. YOLO

# Not understanding why or how something works is always good. YOLO

# Do not ever test your code yourself, just ask. YOLO

# No one is going to read your code, at any point don't comment. YOLO

# Why do it the easy way when you can reinvent the wheel? Future-proofing is for pussies. YOLO

radu-gheorghe

#!/bin/bash

#shows traffic on the specified device

function human_readable {
	VALUE=$1
        BIGGIFIERS=( B K M G )
	CURRENT_BIGGIFIER=0
	while [ $VALUE -gt 10000 ] ;do
		VALUE=$(($VALUE/1000))