gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

jvcleave

#ON THE RPI (if you haven't downloaded openFrameworks)

cd
curl -O http://192.237.185.151/versions/nightly/of_v20151008_linuxarmv6l_nightly.tar.gz
mkdir openFrameworks
tar vxfz of_v20151008_linuxarmv6l_nightly.tar.gz -C openFrameworks --strip-components 1
cd /home/pi/openFrameworks/scripts/linux/debian
sudo ./install_dependencies.sh

#INSTALL SMB WITH / ACCESS

jeffcrouse

#include <Poco/Net/HTTPClientSession.h>
#include <Poco/Net/HTTPRequest.h>
#include <Poco/Net/HTTPResponse.h>
#include <Poco/StreamCopier.h>
#include <Poco/Path.h>
#include <Poco/URI.h>
#include <Poco/Exception.h>

using namespace Poco::Net;
using namespace Poco;

ialpert

function download(url, cb) {
  var data = "";
  var request = require("http").get(url, function(res) {

    res.on('data', function(chunk) {
      data += chunk;
    });

    res.on('end', function() {
      cb(data);

conorbuck

var p1 = {
	x: 20,
	y: 20
};

var p2 = {
	x: 40,
	y: 40
};