launch hdwwiz.exe network adapters -> Microsoft KM-TEST Loopback Adapter -> finish
!Important disable everything except ipv4 in that new network sink inside the ipv4 settings set up a ip, 255.255.255.255 as subnet mask and disable netbios
if you cannot decide on an ip simply use 192.168.2.123. sadly it's impossible to use 127.0.0.2 or similar for this. windows for some unknown reason will not connect to it. elevated windows shell
| #Containers IP Addresses | |
| docker inspect --format='{{.Name}} - {{range .NetworkSettings.Networks}}{{.IPAddress}}{{end}}' $(docker ps -aq) |
| #hass runtime | |
| vi /var/run/s6/services/home-assistant/run | |
| exec python3 -m homeassistant --config /config --verbose --debug --log-rotate-days 1 --log-file /var/log/homeassistant.log | |
| hass -h | |
| usage: hass [-h] [--version] [-c path_to_config_dir] [--demo-mode] [--debug] | |
| [--open-ui] [--skip-pip] [-v] [--pid-file path_to_pid_file] | |
| [--log-rotate-days LOG_ROTATE_DAYS] [--log-file LOG_FILE] | |
| [--log-no-color] [--runner] [--script ...] [--daemon] | |
| cd /usr/local/lib/python3.7/site-packages/ |
If you're a roaming user or you're trying to link a satellite office to the main network, SSH can handle the job. Other solutions exist, and SSH isn't perfect, but this is probably the simplest trick out there.
OpenSSH since version 4.3 has the ability to set up TUN/TAP tunnels. I'm sure most of you have set up port-forwarding via SSH, but this is a little
| # ESP32 POTP (Portable Google Authenticator) | |
| **[status: in developing]** | |
| Portable EAP Protected One-Time Password (EAP-POTP) or GoogleAuthenticator hardware for provides two-factor user authentication. This is a | |
| PlatformIO DIY project for WeMOS like board with ESP32 and OLED SSD1306 display, see materials and instructions below. <a href="https://github.com/hpsaturn/esp32_wemos_oled/blob/master/assets/esp32_potp_intro.jpg"><img src="https://github.com/hpsaturn/esp32_wemos_oled/blob/master/assets/esp32_potp_intro.jpg" align="right" height="512" width="512" ></a> | |
| ## Development Status: |
| 1 Install USB 2 UART drivers | |
| https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers | |
| Neopixel D4 output must be specified exactly as D4 npt just 4 | |
| #define PIN D4 |
RNDIS USB driver for STM32F4: Access your device from any Web browser
| # Double Remote Repositories | |
| git remote set-url --add --push origin [email protected]:tjunussov/uyi.dashboard.git | |
| # Git Add,Commit,Push shourtcut | |
| git acp "Message" | |
| # Git ignore file update | |
| git rm -r --cached . |
| firewall-cmd --zone=public --permanent --add-masquerade | |
| firewall-cmd --zone=external --permanent --add-masquerade | |
| firewall-cmd --zone=public --query-masquerade | |
| firewall-cmd --zone=internal --add-masquerade --permanent | |
| firewall-cmd --zone=public --add-forward-port=port=6554:proto=udp:toport=554:toaddr=10.0.2.60 --permanent | |
| firewall-cmd --reload | |
| firewall-cmd --permanent --zone=public --add-port=6555/tcp | |
| firewall-cmd --list-all --zone=public |
| ##sudo iwlist wlan0 scan | |
| ## | |
| nano /etc/network/interfaces | |
| auto eth0 | |
| allow-hotplug eth0 | |
| iface eth0 inet dhcp |