Tomas Blaha tomasinouk

I have done this on Challenger LTE board link, which is RP2040 based.

You need to enable data serial at boot (boot.py), this is disabled by default. When the board boots you need to run file serial_passthrough.py the program.

Your computer will report new COM/Serial port. Use that to talk with the device connected to uart of the CircuitPython board.

Create files on CIRCUITPY

file: boot.py

To implement Cross-Origin Resource Sharing (CORS) on OpenWRT within Luci is actually simple.

After very long search, I have found code in uHTTPd on gitlab, which clearly shows option for CORS. I haven't found anything, which would describe how to actually configure it.

There is nothing in uHTTPd documentation describing this functionally, /etc/config/uhttpd does not mention anything either.

Luckily, you can have a look into how the process is starting and what parameters is checking.

doing

Here is the start-up script, which in effect does check of 2 IP addresses

#!/bin/sh
#
# This script will be executed when PPP/WAN connection is established.
#
# Script for checking connection by two ping ip addresses
#
# Put checking ip addresses

Script reads BIN0 (binary input 0) on the Conel, SmartWorkx router and displaying it in a console. Can be looged in systemlog as well. Little modification can be done to log it into the file, in CSV format.

#!/bin/ash

OLD0="-1"
SLEEP_TIME=1

while true

	PHONE1=+61423207744
	PHONE2=+6141038#####

	BIN0_TEXT_OUT_OFF="OUT_0 is set to 1"
	BIN0_TEXT_OUT_ON="OUT_0 is set to 0"

	for i in $PHONE1 $PHONE2; do
	logger -t "SMS_COMMAND" "Have these phone no $i"
	done

	import board
	import busio
	import digitalio
	import time


	uart = busio.UART(board.SARA_TX,board.SARA_RX,rts=board.SARA_RTS, cts=board.SARA_CTS, baudrate=115200,timeout=5)

	{% comment %}
	if combine_pretext is false, the text before the first <h6> will be shown above all tabs, otherwise added to the first tab
	{% endcomment %}
	{% assign combine_pretext = false %}

	{% assign description = tabbed-description \| default: product.description %}
	{% if description contains "<h6>" %}
	{% assign tab_heads = '' %}
	{% assign tab_texts = '' %}
	{% assign pretext = '' %}

	# created by Tomas Blaha - Dureco
	# script check camera IP via ping every 30s
	# if cannot ping it turn Off/On PoE for this camera only
	# it does not cycle PoE on second PoE port

	CAMERA_PING=192.168.1.22

	while true
	do
	ping -c 1 $CAMERA_PING

	import shutil
	import os
	import re

	source = os.walk("~/Downloads/camera/")
	destination = "~/Downloads/mobotix-pic/"
	# for files in source:
	for root, dirs, files in source:
	# print(files)
	for _file in files:

	NTP_ENABLED=0
	NTP_PRIMARY_SERVER=pool3.ntp.org