If only you could see the color

ansi_test.log

trans@logisys:ansi$ redline test

                                                                                                                                              
  ANSI v1.2.6                                                                       /home/trans/Documents/programs/github.com/rubyworks/ansi  
                                                                                                                                              

  qed                                                                                                                                   Test  
Started
..............................I, [2011-05-09T15:32:44.350689 #15187]  INFO -- : Info logs are green.

..W, [2011-05-09T15:32:44.351299 #15187]  WARN -- : Warn logs are yellow.

..D, [2011-05-09T15:32:44.351783 #15187] DEBUG -- : Debug logs are cyan.

..E, [2011-05-09T15:32:44.352238 #15187] ERROR -- : Error logs are red.

..F, [2011-05-09T15:32:44.352707 #15187] FATAL -- : Fatal logs are bold red!

.....Test Bar:        1% |o                                                                                                       | ETA:  00:0Test Bar:      100% |oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo| Time: 00:00:01
......Test Bar:        2% ETA:  00:00:51 |oo                                                                                                  Test Bar:      100% Time: 00:00:02 |oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo|

..Test Bar:        2% |o                                                                                     |      2B      0B/s ETA:  00:01:4Test Bar:      100% |oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo|    100B     32B/s Time: 00:00:03

....Test Bar:   2% |==                                                                                                           | ETA:  00:02Test Bar: 100% |=============================================================================================================| Time: 00:00:04

.....................................................F.
Finished in 4.20436 seconds.

***** FAIL *****
(assertion) a == b
a) "+----+----+----+\n| 10\e[0m | 20\e[0m | 20\e[0m | 30\e[0m |\n| 20\e[0m | 10\e[0m | 10\e[0m | 20\e[0m |\n| 50\e[0m | 40\e[0m | 40\e[0m | 20\e[0m |\n+----+----+----+"
b) "+----+----+----+\n| 10 | 20 | 30 |\n| 20 | 10 | 20 |\n| 50n| 20 | 10 | 20 |\n| 50 | 40 | 20 |\n+----+----+----+"
:/home/trans/Documents/programs/github.com/rubyworks/ansi/qed/applique/output.rb:3:in `initialize':
    1 When "output will be" do |text|
    2   # how to get result of last block?
 => 3   @_.strip.assert == text.strip
    4 end
    5 

8 demos, 102 steps: 1 failures, 0 errors (32/33 assertions)

Finished in 4.656781 seconds.
[2]+  Done                    gedit .redfile/test.redfile
trans@logisys:ansi$