sultanqasim

#!/bin/bash

# Raspberry Pi ZRAM script
# Tuned for quad core, 1 GB RAM models
# put me in /etc/init.d/zram.sh and make me executable
# then run "sudo update-rc.d zram.sh defaults"

modprobe zram
echo 3 >/sys/devices/virtual/block/zram0/max_comp_streams
echo lz4 >/sys/devices/virtual/block/zram0/comp_algorithm

brickpop

// Wrapping of the example found on https://gist.github.com/alunny/1904992
// Jordi Moraleda

// This example works on org.apache.cordova.file version 1.1.0 and 1.2.0
// 
// If you are using version 1.3.0, check out the file below
// https://gist.github.com/jmoraleda/78551f439578f7c132c8#file-fswrapper-v1-3-js

 function FSWrapper(options, callback) {
  var self = this;

Divi

#!/usr/bin/env bash

# PARAMETERS
# ----------
# PHP
# ---
PHP_TIMEZONE="UTC"
PHP_DIRECTORY="/etc/php5ts"

EmmanuelKasper

# disable secure boot in the bios, in menu security

# downlad and unzip refind-bin-0.7.8.zip

# install refind, assuming your ESP partition is /dev/sda1 and mounted in /boot/efi
cd refind-bin-0.7.8
./install.sh

# type y and go ahead
# at that time your boot entry should look like that

mmstick

#!/bin/bash
cd /tmp

if ! which lynx > /dev/null; then sudo apt-get install lynx -y; fi

if [ "$(getconf LONG_BIT)" == "64" ]; then arch=amd64; else arch=i386; fi

function download() {
   wget $(lynx -dump -listonly -dont-wrap-pre $kernelURL | grep "$1" | grep "$2" | grep "$arch" | cut -d ' ' -f 4)
}

PaulKinlan

(function() { 
  var CSSCriticalPath = function(w, d, opts) {
    var opt = opts || {};
    var css = {};
    var pushCSS = function(r) {
      if(!!css[r.selectorText] === false) css[r.selectorText] = {};
      var styles = r.style.cssText.split(/;(?![A-Za-z0-9])/);
      for(var i = 0; i < styles.length; i++) {
        if(!!styles[i] === false) continue;
        var pair = styles[i].split(": ");

ricardozea

IE6 Only
==================
_selector {...}

IE6 & IE7
==================
*html or { _property: }

IE7 Only
==================

cybear

Raspberry Pi general optimization

• Use a class 10 SD card for best speed. The USB bus can't come much higher than 30MB/s so you don't have to buy any extremely fast ones though. Not all cards are compatible, check the compatibility list: http://elinux.org/RPi_SD_cards
• Use the HardFloat version of Raspbian instead of the SoftFloat. HF has much faster floating point operations - however SF is required for running Java. So it's either Java or performance, like normal.
• The official Raspbian image gives low network speeds: http://elinux.org/RPi_Performance#NIC
• A graphics driver by Simon / teh_orph is using hardware acceleration for some instructions: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=63&t=28294 installation instructions: http://elinux.org/RPi_Xorg_rpi_Driver
• The firmware can be upgraded which gives, among other things, better GPU performance.

jayj

// --------------------------------------------------
// Flexbox LESS mixins
// The spec: http://www.w3.org/TR/css3-flexbox
// --------------------------------------------------

// Flexbox display
// flex or inline-flex
.flex-display(@display: flex) {
	display: ~"-webkit-@{display}";
	display: ~"-ms-@{display}box"; // IE10 uses -ms-flexbox

ravishi

#!/bin/bash

# TODO
# - Automatically fix the "Unknown display" problem by editing grub defaults
#   like described here: http://askubuntu.com/questions/398903/unknown-display-besides-laptop-built-in-display-old-question-but-with-no-answer

##
## Essential stuff
##
sudo apt-get install -y build-essential aria2 git mercurial subversion \