vadimkozhin

Installing Python 3.5 on Debian Jessie with `pyenv`

Debian Jessie does not come with the correct Python version out of the box, and instead comes with Python 2. To be able to install Python 3(.5), we have a few options. We could build and install from source, but as per Debian's website, we shouldn't do this. Instead, we will use pyenv, a tool that allows users to switch Python versions easily without breaking their system.

Installing `pyenv`

To install pyenv, we will use the official installer.

curl -L https://raw.githubusercontent.com/yyuu/pyenv-installer/master/bin/pyenv-installer | bash

Use the Hubble app to get the camera connected to a wifi network.

Find the Camera's IP address:

> sudo arp-scan --interface=enp3s0 --localnet
Interface: enp3s0, datalink type: EN10MB (Ethernet)
Starting arp-scan 1.8.1 with 256 hosts (http://www.nta-monitor.com/tools/arp-scan/)
192.168.1.100	00:19:99:0f:6a:98	Fujitsu Technology Solutions
192.168.1.102	c4:6e:1f:53:f0:8b	(Unknown)

Xiaomi Yi camera

General info

OS: Buildroot
CPU: ARMv6-compatible processor rev 5 (v6l)
BogoMIPS: 524.28
Memory: 37MB

The root filesystem is rootfs, which is stored in memory and therefore wiped on reboot. The Micro SD card is mounted at /tmp/fuse_d/. Something is also mounted at /tmp/fuse_a and /tmp/fuse_z.

	Notes to make IR shield (made by LinkSprite) work in Raspberry Pi 3 (bought from Amazon [1]).
	The vendor has some documentation [2] but that is not complete and sufficient for Raspbian Stretch.
	Following are the changes that I made to make it work.

	$ sudo apt-get update
	$ sudo apt-get install lirc

	# Add the following lines to /etc/modules file
	lirc_dev
	lirc_rpi gpio_in_pin=18 gpio_out_pin=17

	Hi All!

	I've recently launched a tool that wraps many of the commands here with a user interface. This desktop application is currently available for macOS. There's a roadmap outlining planned features for the near future.
	Feel free to request any features you'd like to see, and I'll prioritize them accordingly.
	One of the most important aspects of this application is that every command executed behind the scenes is displayed in a special log section. This allows you to see exactly what’s happening and learn from it.

	Here's the link to the repository: https://github.com/Pulimet/ADBugger

	App Description:
	ADBugger is a desktop tool designed for debugging and QA of Android devices and emulators. It simplifies testing, debugging, and performance analysis by offering device management, automated testing, log analysis, and remote control capabilities. This ensures smooth app performance across various setups.


	from PySide import QtGui

	def grab_widget(widget=None, filepath=None):
	"""This is a test and is not proofed for production

	Note:
	See QPixmap members being obsolete in Qt5:
	http://doc.qt.io/qt-5/qpixmap-obsolete.html
	"""

	#!/bin/sh

	db_source='https://code.wireshark.org/review/gitweb?p=wireshark.git;a=blob_plain;f=manuf'

	z=$(basename -- "$0")

	if [ -z "$MANUFDB" ]; then
	MANUFDB=~/.cache/manuf.db
	fi
	db=$MANUFDB

	# u-blox commands for activating SFRBX/RAWX (using RTKLIB) with M8N FW 3.01
	# tested on an
	# HW UBX-M8030 00080000*60
	# EXT CORE 3.01 (107900)*33
	# ROM BASE 2.01 (75331)*19
	# FWVER=SPG 3.01*46
	# PROTVER=18.00*11

	# issue these commands in a terminal that supports sending HEX (e.g. ScriptCommunicator)

	#!/bin/bash

	#Install build tools and dependencies
	apt-get -y update
	apt-get -y install cmake libusb-1.0-0-dev make gcc g++ libbluetooth-dev libncurses5-dev libnl-dev \
	pkg-config libpcap-dev python-numpy python-pyside python-qt4

	#Get and build libbtbb
	cd ~
	wget https://github.com/greatscottgadgets/libbtbb/archive/2015-10-R1.tar.gz -O libbtbb-2015-10-R1.tar.gz

vadimkozhin

Installing Python 3.5 on Debian Jessie with pyenv

Installing pyenv

Xiaomi Yi camera

General info

Installing Python 3.5 on Debian Jessie with `pyenv`

Installing `pyenv`