vhsdream

Add the non-free debian repository

echo 'deb http://ftp.us.debian.org/debian bullseye non-free' > /etc/apt/sources.list.d/non-free.list

Refresh

apt update

Add proxmox-specific headers required for DKMS https://en.wikipedia.org/wiki/Dynamic_Kernel_Module_Support

Here are a couple of custom sentences and custom intents that will handle the following scenarios in Home Assistant's Assist:

"turn on the bathroom light and then turn on the bathroom fan"
"turn off the living room heating in 10 minutes"

Installation

copy the contents of custom_sentences.yaml to <your config folder>/custom_sentences/en/chain_delay.yaml
append the contents of configuration.yaml to <your config folder>/configuration.yaml
restart HA (mandatory to reload the custom sentences)

After the restart, in any Assist session (voice or text) you can chain instructions using "and"/"and then"/"then" or instruct HA to do something after some time.

⚠️ CONFIG WAS MOVED HERE ⚠️

https://github.com/tetele/onju-voice-satellite

This Gist will no longer be maintained, please check out the new location for the config.

Introduction

Ever since voice satellites were introduced to Home Assistant, people wanted to use good microphones and speakers for this purpose, but not many were really available.

	# PowerView's last major overhaul is detailed here: http://www.harmj0y.net/blog/powershell/make-powerview-great-again/
	# tricks for the 'old' PowerView are at https://gist.github.com/HarmJ0y/3328d954607d71362e3c

	# the most up-to-date version of PowerView will always be in the dev branch of PowerSploit:
	# https://github.com/PowerShellMafia/PowerSploit/blob/dev/Recon/PowerView.ps1

	# New function naming schema:
	# Verbs:
	# Get : retrieve full raw data sets
	# Find : ‘find’ specific data entries in a data set