worldadventurer’s gists

worldadventurer / freepbx13-post-install-optimize.sh

Last active April 16, 2024 10:50

FreePBX v13 Post-Install Script for Optimizing server

	# This optimizes a fresh installed FreePBX 13 x64 Distro. Not tested on other versions.
	echo This will optimize your server - only run this if you wont have hard phones.
	echo Run this only for a virtual machine
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key

	#Install other needed packages:
	yum install -y git gettext perl-CPAN lrzsz help2man

	# Install other useful stuff from EPEL repository:
	axel -n 8 https://dl.fedoraproject.org/pub/epel/6/x86_64/iperf3-3.0.12-1.el6.x86_64.rpm

worldadventurer / freepbx-install-codecs-encoders.sh

Last active August 20, 2024 02:56

FreePBX Install Codecs & Encoders: mpeg123, lame, ffmpeg, h264, g729

	# Tested on Centos 6 x64
	echo This will install some codecs and encoders.
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key

	# Update mpeg123 to newer version
	echo This will tell you your current version of mpeg123 - note this
	mpg123 --version
	echo Installing a newer version now:
	cd
	# OLD: wget https://sourceforge.net/projects/mpg123/files/mpg123/1.23.8/mpg123-1.23.8.tar.bz2/download -O mpg123-1.23.8.tar.bz2

worldadventurer / freepbx-asterisk-install-ffmpeg-centos6.sh

Last active January 29, 2018 09:44 — forked from mustafaturan/latest-ffmpeg-centos6.sh

FreePBX Asterisk - install latest ffmpeg on Centos 6

	# Tested on Centos 6 x64
	echo This installs ffmpeg on your system.
	echo This takes 20-60 minutes!
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key
	#
	# source: https://trac.ffmpeg.org/wiki/CompilationGuide/Centos

	yum -y install autoconf automake gcc gcc-c++ git libtool make nasm pkgconfig zlib-devel freetype-devel speex-devel

	mkdir ~/ffmpeg_sources

worldadventurer / freepbx-asterisk-install-g729-g723-codec.sh

Last active May 28, 2021 04:53

FreePBX Asterisk 13 install g729 & g723.1 codecs - open source versions

	# This is for x64 Intel CPU with SSSE4 instructions
	# To check your CPU type, run: cat /proc/cpuinfo and look for "sse4_1" in the "flags" line then this script works
	# To check x32 vs x64, run: getconf LONG_BIT
	# If your CPU isnt an x64 or have sse4 support, then get your .so file version at: http://asterisk.hosting.lv/
	# Tested on Centos x64 - on a FreePBX Distro 13 x64
	echo -------
	echo This installs the open source version of the g729 and g723.1 codecs
	echo You may need to buy licenses to use these codecs - it is your responsibility.
	echo -------
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key

worldadventurer / change-ssh-port.sh

Last active January 15, 2024 07:13

Change SSH Port - prompts on command line for new port number

	#!/bin/bash
	# Copied from https://github.com/FreePBXHosting/freepbx-scripts/tree/master/sshport
	#
	# To run the script, login as root via SSH and run the following command:
	# bash <(curl -Ls https://gist.github.com/worldadventurer/842f1a10762cba0ce27dc8f99a835377/raw)
	#
	#############################################
	# FreePBXHosting.com - @freepbxhosting #
	# VERSION 1.6 UPDATED JUN 25 2015 #
	# DESC: CHANGES SSH PORT AND RESTARTS SSH #

worldadventurer / axel-install-centos.sh

Created December 28, 2016 11:06

	# Tested on Centos 6 x64
	echo This compiles and installs axel on your system
	echo axel is a multi-threaded downloader
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key
	#
	cd
	git clone https://github.com/FiloSottile/axel.git
	cd axel
	./configure && make && make install
	#Finished

worldadventurer / freepbx-asterisk13-install-opus.sh

Last active May 28, 2021 05:04

FreePBX Asterisk 13 Install Opus Codec

	# This is for x64 only
	# To check x32 vs x64, run: getconf LONG_BIT
	# Tested on Centos x64 - on a FreePBX Distro 13 x64
	echo -------
	echo This installs opus codec from the Digium website
	echo -------
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key

	cd ~
	wget http://downloads.digium.com/pub/telephony/codec_opus/asterisk-13.0/x86-64/codec_opus-13.0_1.1.0-x86_64.tar.gz

worldadventurer / asterisksendmailmp3.sh

Created January 2, 2017 20:59

FreePBX Asterisk Send Voicemail as mp3 script

	#! /bin/sh
	# Asterisk voicemail attachment conversion script
	# Revision history :
	# 22/11/2010 - V1.0 - Creation by N. Bernaerts
	# 07/02/2012 - V1.1 - Add handling of mails without attachment (thanks to Paul Thompson)
	# 01/05/2012 - V1.2 - Use mktemp, pushd & popd
	# 08/05/2012 - V1.3 - Change mp3 compression to CBR to solve some smartphone compatibility (thanks to Luca Mancino)
	# 01/08/2012 - V1.4 - Add PATH definition to avoid any problem (thanks to Christopher Wolff)
	# set PATH
	PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"

worldadventurer / FreePBX-Upgrade-Latest-Build.sh

Last active August 2, 2021 20:32

	# This will upgrade your FreePBX install to the latest build.
	# Tested on FreePBX 13 iso on CentOS
	# Source: https://wiki.freepbx.org/display/PPS/FreePBX-Distro-10.13.66?focusedCommentId=69075041#comment-69075041

	ugdir=/root/upgradescripts
	if [ ! -d $ugdir ]
	then
	mkdir $ugdir
	fi
	version=`cat /etc/schmooze/pbx-version`

worldadventurer / freepbx14-post-install-optimize.sh

Last active August 2, 2021 20:32

FreePBX v14 Post-Install Script for Optimizing server

	# This optimizes a fresh installed FreePBX 13 x64 Distro. Not tested on other versions.
	echo NOTE - BE SURE THIS IS A CORRECT SERVER BEFORE RUNNING THIS
	echo NOTE: This optimizes a fresh installed FreePBX 14 x64 Distro. Not tested on other versions.
	echo This will optimize your server - only run this if you wont have hard phones.
	echo Run this only for a virtual machine
	read -rsp $'Press any key to continue OR CTRL-c to QUIT ...\n' -n1 key

	#Install updates & other needed packages:
	echo INSTALLING OS UPDATES-
	yum update -y && yum upgrade -y