xdenb43

В связи с гонкой за недружественными ресурсами слишком часто стали страдать ресурсы дружественные.

NTP Client failover:

• NTP сервер name resolution через DNS FWD, так как если настроен DoH и он недоступен, то ффсё

FQDN ("Resolved Address" will appear in the "Servers"- window in an appropriate column if the address is resolved) or IP address can be used. If DHCP-Client property use-peer-ntp=yes - the dynamic entries advertised by DHCP
To set the NTP server using its FQDN. The domain name will be resolved each time an NTP request is sent. Router has to have /ip/dns configured.

• классика: сервера ru.pool.ntp.org
• запасной 1: MSK-IX NTP Server
• запасной 2: ФГУП «ВНИИФТРИ» Москва

xdenb43

Подправил скрипт @wiktorbgu:

Note

• Скрипт добавляется по пути в меню System - Scripts с именем wg-antidpi, те можно пнуть скрипт когда угодно
• Сам прописывается в System - Scheduler при первом ручном запуске
• учтены правки из чата antifilter.network

# wg-antipdi traffic flood | by antifilter tg chat
# Enable traffic-gen: /system device-mode update traffic-gen=yes

xdenb43

--> adguard home to container | by @xdenb43
--> tested on hap ax3/ROS 7.17.2+

Important

defconf network 192.168.88.1/24
docker network 192.168.254.1/24

Install AdGuard Home (AGH) to MikroTik using container

Prerequisites

• Containers are enabled following official docs

xdenb43

logEventTGInformer | by xdenb43
Sends log events filtered by condition(s) to specific topic of telegram super-group

Specs

• Created to post messages to dedicated topic of the specified supergroup telegram instance
• Default filtering conditions: topics~"(error|critical|netwatch)" || message~"([fF]ailure|router rebooted|checkOSUpdate)"
• NO time-format related troubles, mikrotik internal function totime used
• Executes every 60 seconds
• Uses limit to 4096 message symbols

xdenb43

checkOSUpdate | by xdenb43

Specs

• Created to inform about available updates via telegram
• Executed every 24h
• automatically added to scheduler with the first manual execution
• Posts info message to log if update is available

[!IMPORTANT]