Skip to content

Instantly share code, notes, and snippets.

View xiocode's full-sized avatar

Tony.Shao xiocode

86 followers · 97 following
View GitHub Profile
@gnepud
gnepud / shadowsocks_ssh
Last active April 30, 2018 20:42
shadowsocks / ssh proxy
----- shadowsocks ------
server
easy_install pip
pip install shadowsocks
vi /etc/shadowsocks.json
{
"server":"server_ip",
"server_port":8388,
"local_address": "127.0.0.1",
"local_port":1080,
@bao3
bao3 / GFW_ADBlock.conf
Last active March 3, 2024 06:10
由于 Surge for ios 的条目数量不能过大，导致手机内存不足，所以将 GFW 和 广告过滤集中后进行了人工挑选，压缩在 1万条左右，你仍然可以自己添加大约 900条规则，理论上足够你长久使用了，配置文件默认是直连，方便普通国内用户使用。配置文件中，我自己调整过的、有可能有误伤的条目我都放在了前面，方便你自己修改，不过运行自 2016/01 ~ 2016/02 我自己日常没有遇到问题。有误伤不要怕，打开软件可以自己调试添加。
[General]
#我的注释都是 # 开头，所以如果你用 vim，直接 :g/^#/d 就可以一次性清除所有注释
#开头这段skip包含以下几个目的：1，私网IP跳过，提高内网性能；2，苹果的一些服务跳过，比如公共热点wifi要先测试captive.apple.com。可解决很多内网的 TCP毛病，例如 kodi remote软件无法遥控
skip-proxy = 10.0.0.0/8,169.254/16,172.16.0.0/12,192.168.0.0/16,224.0.0.0/4, localhost, *.local,api.smoot.apple.com,configuration.apple.com,xp.apple.com,smp-device-content.apple.com,guzzoni.apple.com,captive.apple.com,*.ess.apple.com,*.push.apple.com,*.push-apple.com.akadns.net
#下面这一段则是完全跳过 Surge，最重要的一个是让 UDP包可以传输，解决很多内网毛病，例如DLNA，NFS或者btsync等组播类/UDP类应用
bypass-tun = 10.0.0.0/8, 169.254.0.0/16, 172.16.0.0/12, 192.168.0.0/16, 224.0.0.0/4, 0.0.0.0/8, 1.0.0.0/9, 1.160.0.0/11, 1.192.0.0/11, 10.0.0.0/8, 14.0.0.0/11, 14.96.0.0/11, 14.128.0.0/11, 14.192.0.0/11, 27.0.0.0/10, 27.96.0.0/11, 27.128.0.0/9, 36.0.0.0/10, 36.96.0.0/11, 36.128.0.0/9, 39.0.0.0/11, 39.64.0.0/10, 39.128.0.0/10, 42.0.0.0/8, 43.224.0.0/11, 45.64.0.0/10, 47.64.0.0/10, 49.0.0.0/9, 49.128.0.0/11, 49.192.0.0/10, 54.192.0.0/11, 58.0.0.0/9, 58.128.0.0/11, 58.192.0.0/10, 59.32.0.0/11, 5
@abegodong
abegodong / initd-nodhcp
Last active June 6, 2020 03:33
Softether VPN + DNSMasq
#!/bin/sh
# chkconfig: 2345 99 01
# description: SoftEther VPN Server
DAEMON=/usr/local/vpnserver/vpnserver
LOCK=/var/lock/subsys/vpnserver
SERVER_IP=[SERVER_IP]
test -x $DAEMON || exit 0
case "$1" in
start)
$DAEMON start
@epiphani
epiphani / CDHTez.md
Last active February 14, 2024 08:03
Getting Tez enabled on CDH5.4+

So Hive in CDH is horribly, painfully slow. Cloudera ships Hive 1.1, which is actually moderately modern. It is, however, very badly configured out of the box and patched with custom code from Cloudera. With a bit of effort, we managed to improve hive performance considerably. We really shouldn't have to do this, but Cloudera is actively working against supporting a performant Hive.

First, building Tez was fairly straightforward. Using the instructions at https://github.com/apache/tez/blob/master/docs/src/site/markdown/install.md, the only change was to use the version string "2.6.0" for the build. I believe that was the default. Don't use the CDH string, it won't work.

At the bottom of the installation instructions, there's mention of the fact that to use the local hadoop jars (rather than those packaged with tez) you must unpack the jars in HDFS rather than using the tarball. In this case, unpack the tez-minimal tarball and upload the contents to /apps/tez-0.7.0 (or whatever you prefer). Don't fo

@jason5ng32
jason5ng32 / surge.conf
Last active November 6, 2024 06:39
Surge Configs ( for 2.x )
[General]
loglevel = notify
skip-proxy = 127.0.0.1, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, ::ffff:0:0:0:0/1, ::ffff:128:0:0:0/1
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
# dns-server = 119.29.29.29,223.5.5.5,114.114.115.115
# external-controller-access = [email protected]:6155
# ipv6 = true
// REMEMBER TO CHANGE THE external-controller-access' PASSWORD
@soffchen
soffchen / surge.conf
Last active June 7, 2025 08:42
surge.conf
[General]
skip-proxy = 127.0.0.1, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, ::ffff:0:0:0:0/1, ::ffff:128:0:0:0/1
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
# dns-server = 119.29.29.29, 223.5.5.5, 114.114.114.114
loglevel = notify
[Proxy]
BJ-All = custom
BJ-HK-Azure = custom
BJ-US-Azure = custom
@janlay
janlay / README.md
Last active March 20, 2025 13:05
Yet another config for Surge.app

Install

  1. Modify index.txt with your output path and proxy info
  2. Use Text Builder to build configuration for Surge: $ text-builder -index /path/to/index.txt Or run $ sh build-all to build all your index files.
  3. Import configuration via AirDrop/iTunes/Dropbox/iCloud

本人不提供任何保证和技术支持，使用者自负风险。
There are no guarantees, no any support. Use it at your own risk.

@lanceliao
lanceliao / Linux系统下shadowsocks透明代理的配置.md
Last active September 20, 2019 14:55
  1. 开启ipv4转发
vi /etc/sysctl.conf
# 将net.ipv4.ip_forward=0更改为net.ipv4.ip_forward=1
sysctl -p
  1. 安装dnsmasq 和pdnsd解决dns污染

DNS的解析方案为 resolve.conf ==> dnsmasq ==> pdnsd

@WebReflection
WebReflection / opkg-upgrade-all
Created August 4, 2015 21:26
A simple way to upgrade all packages in an Open WRT distribution
#!/usr/bin/env sh
for p in $(opkg list-upgradable); do
if [ "$p" != "-" ]; then
if [ "$(echo ${p:0:1} | sed -e 's/[0-9]//')" != "" ]; then
echo "upgrading $p"
opkg upgrade $p
fi
fi
done
@mcastilho
mcastilho / gist:e051898d129b44e2f502
Last active August 23, 2025 02:57
Cheap MapReduce in Go
package main
import (
"bufio"
"encoding/csv"
"encoding/json"
"fmt"
"io"
"os"
"path/filepath"