https://github.com/EdgeTX/edgetx/wiki/Building-radio-firmware-in-a-webbrowser-with-Gitpod
https://github.com/EdgeTX/edgetx/wiki/Build-Instructions-under-Ubuntu-20.04
by default,openwrt do not allow ssh access from wan, here are two method to change that: | |
1.login into your wrt from a lan host.issue the following command: | |
iptables -F | |
the command "flush away" all the firewall rules,including the one that rejects ssh request from wan. | |
now you can try ssh from anywhere. | |
aware that the firewall deactivation leads to highly security risk.and after the wrt restarts ,all default firewall configuration comes back.you hava to "flush" the rules once again. |
# See https://halu.lu/%E6%9D%82%E8%B0%88/cloudflare-warp/ | |
# Depolyed at https://warp.halu.lu/ | |
// Change keys if needed | |
const keys = [ | |
"9WO41D5p-6OP8xj27-36gQG75D", | |
"R65K12Up-aU907O2e-4nuvD581", | |
"06LM94EJ-1nl0V2d7-V847va5y", | |
] |
By time time of writting which is 11th Aug 2024, ChatRTX from Nvidia has only offically supported RTX 30/40 series GPU. I have a RTX 2080Ti which Nvidia has abandoned support.
I don't like this.
So I found out the way of bypassing the ChatRTX installation process on Windows 11 with RTX 2080 Ti.
After finishing downloading all the ChatRTX zip file from Nvidia, find some files in the folder and change it. https://www.nvidia.com/en-us/ai-on-rtx/chatrtx/
Steps
Domain | Description |
---|---|
dis.gd | Discord's URL shorter (I like .gd as top-level domain) |
discord.co | Admin panel, this means not for us! (Not discord administrators / maybe staffs) |
discord.com | The domain is for e.g the homepage or message links etc |
discord.design | Dribbble profile shortlink |
discord.dev | Developer site shortlinks |
discord.gg | Invite shortlinks |
init...
#define LED_D4 13
#define LED_D5 12
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
pinMode(LED_D4,OUTPUT);
This issue has been there since many years. It can be found on some forums. Searching links from Google https://www.google.com/search?q=Synology+GPT+PMBR+size+mismatch+%28239649+%21%3D+245759%29+will+be+corrected+by+write.&newwindow=1
I personally enabled 2 pcie-nvme SSD disks as Read-Write cache RAID1 on Synology NAS. Then I disabled them safely from DSM web UI (Storage Manager / Storage / Select your Volume), then I found some error from terminal via command
fdisk -l
. After I removed the 2 SSDs, the error was still there.
Error: GPT PMBR size mismatch (239649 != 245759) will be corrected by write.
reported by fdisk -l
via SSH to NAS.
GPT PMBR size mismatch (239649 != 245759) will be corrected by write.
Disk /dev/synoboot: 120 MiB, 125829120 bytes, 245760 sectors
Disk model: DiskStation