zima yeenbean

Installing the Broadcom wireless drivers on a Mac in Ubuntu, Debian, and Debian derivatives

#linux #mac #broadcom #hardware

⚠️ Although this procedure has been tested on a MacBook Air 6,2, it may vary depending on your hardware. If you have a different device or if your process differs from the instructions below, please leave a comment so that I can update this guide accordingly.

Before following the instructions below, make sure your machine is connected to a network. If your machine doesn't have an Ethernet adapter, you can use your phone's hotspot via USB.

Keybase proof

I hereby claim:

I am yeenbean on github.
I am yeenbean (https://keybase.io/yeenbean) on keybase.
I have a public key ASAfrrr2ShinxJyzchElWoX4qDws2jNYl1TfDEodJQ0cNAo

To claim this, I am signing this object:

Keybase proof

I hereby claim:

I am melozh on github.
I am deadmau5 (https://keybase.io/deadmau5) on keybase.
I have a public key whose fingerprint is 11C3 8D52 18B1 C1F2 B151 ED2B 5593 AE08 F011 F732

To claim this, I am signing this object:

Keybase proof

I hereby claim:

I am dankmau5 on github.
I am deadmau5 (https://keybase.io/deadmau5) on keybase.
I have a public key whose fingerprint is 3C0C 5E0B 7B63 C688 182F F0D8 E358 2FAF F4B6 272B

To claim this, I am signing this object:

	#### PLEASE READ THIS BEFORE PASTING INTO YOUR pf.conf FILE ####
	#
	# This configuration is designed for PIA with a UDP configuration, and will
	# block ALL TRAFFIC on en0 with the exception of the designated ports specified
	# below in pia_udp_ports. It will likely NOT WORK out of the box; you will need to
	# identify the interface that PIA uses and it will likely NOT be utun2.
	#
	# The advantage of using this pf configuration is to simulate PIA's killswitch
	# as soon as the system boots up rather than when PIA is launched, and allows
	# for a tiny bit more peace of mind. It is NOT perfect: all traffic, outbound