The repository for the assignment is public and Github does not allow the creation of private forks for public repositories.
The correct way of creating a private frok by duplicating the repo is documented here.
For this assignment the commands are:
git clone --bare [email protected]:usi-systems/easytrace.git
Non-Uniform Memory Access (NUMA) is one of the computer memory design methods used in multiprocessor systems, and the time to access the memory varies depending on the relative position between the memory and the processor. In the NUMA architecture, when a processor accesses its local memory, it is faster than when it accesses the remote memory. Remote memory refers to memory that is connected to another processor, and local memory refers to memory that is connected to its own processor. In other words, it is a technology to increase memory access efficiency while using multiple processors on one motherboard. When a specific processor runs out of memory, it monopolizes the bus by itself, so other processors have to play. , and designate 'access only here', and call it a NUMA node.
lspci | grep -i nvidia
01:00.0 VGA compatible controller: NVIDIA Corporation TU106 [GeForce RTX 2060 12GB] (rev a1)
| - make sure sriov is enabled in your motherboard bios | |
| - don't use the nvidia gpu as a display (i use asrock rack boards and the crappy on board graphics for local display, which i actually don't use unless there's a problem). | |
| - install nvidia drivers on the host: ./NVIDIA-Linux-x86_64-xxx.xxx.run | |
| - blacklist nvidia and nouvaeu kernel drivers on the host, reboot | |
| - pass the devices through to the LXC before installing drivers, details below (prob doesn't matter, but i do it in this order) | |
| - install THE SAME nvidia drivers on the LXC: ./NVIDIA-Linux-x86_64-xxx.xxx.run --no-kernel-module | |
| below is an example with 4 gpus | |
| find the device info you'll need for passthrough: |