WPS on OpenWRT -- Enabling Wi-Fi Protected Setup on OpenWRT

wps_openwrt.sh

##
## WPS on OpenWRT
##  This script enables Wi-Fi Protected Setup on OpenWRT.
##
##  Resources
##      http://wiki.openwrt.org/doc/uci/wireless#wps.options
##      

#Install the full wpad package
opkg update
opkg remove wpad-mini
opkg install wpad hostapd-utils

#Enable WPS on the Wifi network interface.
# Notes:
#  * The network interface should be configured to support WPA2-PSK
#  * This script assumes the last interface is the one used for WPS, hence using @wifi-iface[-1]
#  * You can view all the wireless interfaces by issuing the following command and getting the index of the correct one
#       uci show wireless
uci set wireless.@wifi-iface[-1].wps_pushbutton=1

#The following are all optional
uci set wireless.@wifi-iface[-1].wps_device_name="OpenWRT AP"
uci set wireless.@wifi-iface[-1].wps_manufacturer="openwrt.org"

##
## Save Changes & Reboot
##
uci commit
reboot

##
## Run WPS
##
hostapd_cli -p /var/run/hostapd-phy0 wps_pbc